Enfain OM3 LC-FC Duplex Multimode Fibre Optic Cable 25m
A 25-metre OM3 duplex multimode patch cord with LC and FC connectors, 3.0 mm jacket, 850 nm wavelength, 0.2 dB typical insertion loss and >38 dB return loss
- Supports 10/40G speeds with OM3 850nm core
- Low 0.2dB typical insertion loss preserves signal quality
- High >38dB return loss minimises back-reflection
- Durable 3.0mm PVC jacket rated for 1000 mating cycles
- Operates reliably from -20°C to +60°C
Enfain OM3 Duplex Patch Cable
This 25 metre OM3 multimode cable carries 10 gigabit signals over an 850 nm wavelength. It uses a duplex LC to FC connector pair with a 3.0 mm PVC jacket and ceramic ferrules. Typical insertion loss is .2 dB and maximum insertion loss is .3 dB while return loss exceeds 38 dB.
Suited for short reach data centre links
The cable suits server, switch and storage connections inside a rack or between adjacent racks. It supports 1G, 10G and 40G multimode standards. Builders who need single mode reach, longer distances or a different connector combination should choose another cable.
Fits standard LC and FC transceiver ports
The 330 mm minimum bending radius allows tidy routing in dense patch panels. Ceramic ferrules withstand 1000 mating cycles and the assembly operates from -20 °C to +60 °C. The aqua jacket identifies OM3 grade fibre at a glance.
How it compares
Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.
- Price $48.99
- Pricier than about 65% of the 812 comparable items (median $29.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Questions about this item
What connectors must my switch and server already have to use this LC-FC duplex cable?
One end needs an LC port and the other an FC port; both must support multimode fibre at 850 nm.
Will this OM3 patch cord still reach 10 Gbps if I keep my older 1 Gbps transceivers?
Yes, the cable is rated for 1 G, 10 G and 40 G operation, so legacy 1 G transceivers will work.
How can I verify the link is healthy after I plug it in?
Measure insertion loss with a light source and power meter; typical loss should be around .2 dB and not exceed .3 dB, while return loss should be better than 38 dB.
More in Fiber Optic Patch Cables
Similar items
Tripp Lite N820-10M 32.81 ft 10Gb Aqua Duplex Multimode 50/125 Fibre Optic Cable
- Fiber Optic
- Aqua
Black Box Corporation EFN310-002M-LCLC Single-Mode 9-Micron Duplex Fibre Optic Cable LC-LC PVC 2-m 6.5-ft
- Others
- Yellow
Belkin F2F202LL-15M 49 ft fibre optic cable
- Fiber Optic
- Orange
Tripp Lite N816-15M 50 ft Aqua Duplex fibre optic cable
- Others
- Aqua
Black Box Corporation EFN6021-002M fibre optic cable OM2 50-micron LC-SC orange 2m
- Fiber Optic Cables
- Orange
OpticBuilds.com Opti Tap SC/APC to SC/APC Simplex SMF G.657.A2 0.3m 0.5m breakout 2.0mm 5.0mm LSZH
- Fiber Optic










