Enfain OM3 ST-ST Duplex Multimode Fibre Optic Cable 10m Aqua Blue
OM3 duplex multimode fibre patch cable with ST connectors, 10 metre length, 3.0 mm jacket, 850 nm wavelength, 0.2 dB typical insertion loss and >38 dB return loss
- Supports 10 Gbps links with OM3 10-gigabit core
- Low typical insertion loss of .2 dB for efficient signal transfer
- Return loss exceeds 38 dB to minimise reflections
- 0 mm PVC jacket rated for 1000 mating cycles
- Operates reliably from -20 °C to +60 °C
Ready for 10 Gb links
This duplex multimode patch cord uses an OM3 core rated for 10 Gb transmission at 850 nm. It suits switches, servers and data-centre gear that need short-range fibre connections. Builders running 1 Gb or 40 Gb over the same multimode infrastructure can also use it. It is not for single-mode links or runs that exceed OM3 distance limits.
ST connectors, 3.0 mm jacket
Ceramic ferrules on both ST ends give repeatable alignment over 1000 mating cycles. The 3.0 mm PVC sheath resists everyday rack handling and meets a 330 mm minimum bend radius. Aqua blue colour coding identifies OM3 multimode at a glance. Installers who need LC, SC or MPO interfaces must choose a different cable.
Low loss, wide temperature range
Typical insertion loss is .2 dB with a maximum of .3 dB, while return loss exceeds 38 dB. The assembly operates from -20 °C to +60 °C without active cooling. No power supply or fan is involved, so acoustic noise is zero. Users needing armoured or plenum-rated jackets should select another product.
How it compares
Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.
- Price $24.99
- Cheaper than about 57% of the 812 comparable items (median $29.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Questions about this item
What does the OM3 multimode standard cap the 10 m link at?
The OM3 10-gigabit core supports 1 G, 10 G and 40 G transmission at 850 nm wavelength over this 10 m duplex patch cord.
What physical space is needed to route the 3.0 mm jacket without exceeding the bend limit?
The 3.0 mm PVC jacket requires a minimum bending radius of 330 mm to avoid signal degradation or fibre damage during installation.
How do you seat the ST connectors correctly, and what is the common mistake?
Insert each ST connector fully until the bayonet locks; the common error is stopping at first contact, which leaves insertion loss above the 0.2 dB typical and 0.3 dB maximum spec.
More in Fiber Optic Patch Cables
Similar items
Tripp Lite N820-10M 32.81 ft 10Gb Aqua Duplex Multimode 50/125 Fibre Optic Cable
- Fiber Optic
- Aqua
AddOn AJ835A-AO 6.56 ft LC OM3 Aqua fibre optic cable
- 2 x LC Male Network
- Network Cable
Black Box Corporation EFN310-002M-LCLC Single-Mode 9-Micron Duplex Fibre Optic Cable LC-LC PVC 2-m 6.5-ft
- Others
- Yellow
Tripp Lite N366-05M fibre optic cable LC/SC 5m 16ft 8.3/125 duplex
- Others
- Yellow
Belkin F2F202LL-15M 49 ft fibre optic cable
- Fiber Optic
- Orange
6COMGIGA 6C-MTP-2M 2M MPO Female to Female 12 Fibers OM4 3.0mm LSZH Multimode Fibre Optic Cable
- Fiber optical cable
- Magenta










