Enfain OM3 ST-ST Duplex Multimode Fibre Optic Cable 25m Aqua Blue
A 25 m aqua OM3 duplex patch cord with ST connectors, 3.0 mm jacket, ceramic ferrules, 850 nm wavelength, .2 dB typical insertion loss and >38 dB return loss for 10 Gbit links
- Supports 10 Gb/s links with OM3 10-gigabit core
- Low 0.2 dB typical insertion loss preserves signal strength
- Return loss above 38 dB reduces reflected light
- 0 mm PVC jacket rated for 1000 mating cycles
- Operates from -20 °C to +60 °C for data-centre use
Enfain OM3 ST-ST Duplex Cable
The Enfain OM3 ST-ST duplex multimode fibre optic cable is built for 10G gigabit links in switches, servers and data centres. It uses a 3.0 mm PVC jacket with ceramic ferrules and an aqua blue colour code for quick identification. The 25 metre length suits rack-to-rack or cross-connect runs.
OM3 10G core capacity and headroom
The OM3 10-gigabit core supports 1G, 10G and 40G compatible transmission at 850 nm wavelength. Typical insertion loss is .2 dB and maximum insertion loss is .3 dB, while return loss exceeds 38 dB. Bandwidth headroom ends at the rated 40G compatibility and the 25 metre reach.
Thermals noise and power draw
Passive glass fibre generates no heat and produces no audible noise during operation. The cable draws no electrical power and operates reliably from -20°C to +60°C. A 330 mm bending radius and 1000 insertion cycles ensure durable handling in normal use.
How it compares
Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.
- Price $52.99
- Pricier than about 67% of the 812 comparable items (median $29.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Questions about this item
Will the ST connectors on this OM3 cable mate with the older ST patch panels we already have in the rack?
Yes, the duplex ST connectors follow the standard interface used on legacy panels, so they will plug directly into your existing ST bulkheads without adapters.
How can I verify the link is performing to the rated 0.2 dB typical insertion loss after installation?
Use a light source and power meter at 850 nm; a measured loss at or below 0.3 dB confirms the cable meets its maximum specification.
Does the 25 m aqua-blue cable ship with dust caps or protective boots, or must I order them separately?
The cable arrives with protective caps on both ceramic ferrules; no extra accessories are required for immediate deployment.
More in Fiber Optic Patch Cables
Similar items
Tripp Lite N820-10M 32.81 ft 10Gb Aqua Duplex Multimode 50/125 Fibre Optic Cable
- Fiber Optic
- Aqua
Belkin F2F202LL-15M 49 ft fibre optic cable
- Fiber Optic
- Orange
Black Box Corporation EFN310-002M-LCLC Single-Mode 9-Micron Duplex Fibre Optic Cable LC-LC PVC 2-m 6.5-ft
- Others
- Yellow
Tripp Lite N816-15M 50 ft Aqua Duplex fibre optic cable
- Others
- Aqua
Black Box Corporation EFN6021-002M fibre optic cable OM2 50-micron LC-SC orange 2m
- Fiber Optic Cables
- Orange
iMBAPrice 200Ft Pack of 2 CAT5e RJ45 Patch Ethernet Network Cable 200 FT White
- Network Cable










