We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two bottles of flux paste and a spool of solder wick

Essmetuin RMA799 No Clean Soldering Flux Paste & Solder Wick 10ft 10cc 2Pack

SKU CH-HABC-F1PBX MPN RMA799

No-clean flux paste and 10 ft desoldering wick remove oxide and tin from circuit boards with minimal residue left behind

  • Certifications and standardsLead Free Compliant
  • Lead-free and halogen-free formula protects components
  • No-clean flux leaves minimal residue, cuts cleaning time
  • 10 ft desoldering braid removes solder efficiently
  • RMA799 paste improves wetting and oxide removal
  • 2-pack supplies flux and wick for board repairs

Soldering Kit for Electronics Repair

The RMA799 kit pairs a 10cc no-clean flux paste with a 10ft desoldering braid. It suits technicians and hobbyists working on PCB, SMD or SMT assemblies. The flux removes oxidation to improve wetting, while the wick lifts excess solder during rework. Both items are lead-free and halogen-free.

Practical Limits of No-Clean Flux and Braid

Flux residue is low but not zero; high-reliability or conformal-coated boards may still require cleaning. The braid width is fixed, so very fine-pitch components can be harder to desolder without bridging. Heavy oxidation or large thermal masses may need repeated flux application or a broader wick.

Capacity and Headroom for Rework Tasks

One 10cc bottle and a 10ft roll handle dozens of typical joint removals and chip reflow cycles. The supply covers phone, appliance and meter repairs comfortably. Very high-volume production or large-area ground-plane desoldering will exhaust the wick and paste faster than occasional bench use.

How it compares

Measured against everything we stock in Soldering Irons & Stations, at today’s prices. Recalculated every night.

Price $21.99
Cheaper than about 58% of the 802 comparable items (median $25.99).

Specifications

Environment & compliance
Certifications and standardsLead Free Compliant

Questions about this item

Should I choose the 2-pack or buy bottles separately?

The listing ships as a 2-pack containing two 10 cc bottles of RMA799 flux paste plus one 10 ft spool of desoldering wick; there is no single-bottle option in this SKU.

How much residue will the RMA799 flux leave on a PCB after soldering?

It is formulated as a no-clean, low-residue rosin flux that leaves only a thin, non-corrosive film, so board cleaning is usually unnecessary.

What does the lead-free compliance mean for my soldering work?

The flux and wick meet lead-free standards, making them safe for modern RoHS assemblies while still delivering strong wetting on both lead-free and tin-lead solders.

More in Soldering Irons & Stations

Similar items