Nippon Labs 50DP14V-MM-6 DisplayPort cable 6 ft 8K 60Hz HBR3 32.4 Gbps
- 6 ft (1.83 m)
- DisplayPort Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 6 ft DisplayPort 1.4 cable carrying 32.4 Gbps for 8K at 60 Hz or 4K at 144 Hz with triple-shielded fibre and 24K gold connectors
This six-foot DisplayPort 1.4 cable carries up to 32.4 Gbps bandwidth. It supports 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz with HDR10 and DSC 1.2. Gold-plated connectors and triple-layer shielding protect signal integrity for graphics cards, VR headsets and high-refresh monitors.
The step up is worthwhile when your display demands 4K above 120 Hz or 8K at 60 Hz, since legacy cables cap at lower bandwidth. HBR3 support and the hybrid fibre-copper design remove the signal drop-outs common on long passive copper runs at these data rates.
Buyers needing runs longer than six feet or an in-wall rated jacket should look at something else. The cable is male-to-male only, so it cannot adapt to HDMI or USB-C inputs without a separate adapter.
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ESTONE |
| Model name | DP28 |
| Product type | DisplayPort |
| Product color | Black |
| Performance | |
| Rated speed | Supports up to 32.4 Gbit/s bandwidth. |
| Display | |
| Refresh frequency | Support 4K@144 Hz and 8K@60 Hz( backward compatible with 2K and 1080P resolutions.) |
| Ports & slots | |
| Connector count | 1 |
| Source connector | 1 x DisplayPort 1.4 |
| Destination connector | 1 x DisplayPort 1.4 |
| Connector details | DisplayPort to DisplayPort( Male to Male) |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | 6 ft (1.83 m) |
| Cable length | 6 ft (1.83 m) |
| Conductor type | Triple-shielded |
| Compatibility | |
| Supported platforms | Certified for Windows Vista |
The connectors are standard DisplayPort 1.4 male plugs; allow roughly 40 mm depth behind the port for the plug body and strain relief.
Insert each connector with the wide side of the trapezoid facing up until the latch clicks; forcing it upside-down bends the internal pins.
The nylon-braided jacket is rated for 30000+ bend cycles; inspect only if the latch fails or signal drops appear.
More in DisplayPort Monitor Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?