ESTONE H11/H8/H9 LED Headlight Bulb Set 6500K 8000LM IP68
- 8 to 60 deg
- Headlights
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An H7 LED conversion kit delivering 8000 lumens per set at 6500 K with IP68 waterproofing
The ESTONE H7 LED conversion kit replaces factory halogen bulbs with a pair of CSP LED units that deliver 8000 lumens per set at 6500K colour temperature. Each bulb draws 25 watts from a 9 to 14.5 volt supply and uses dual-polarity current control for stable operation. The kit is sold as a matched set of two for driver and passenger sides.
The driver, housing and connectors carry an IP68 rating so the assembly survives immersion and extreme weather without a cooling fan. A compact driver and dual-polarity plugs allow direct installation into the existing H7 sockets without rewiring the vehicle harness. The clear lens and black housing keep the factory headlamp appearance while the beam angle spans 8 to 60 degrees.
The kit provides up to 30 percent more light on the road than a standard halogen H7 bulb while consuming less power and producing far less heat. It is not suited for vehicles that require a different base type or for buyers who need a high-beam-only or low-beam-only solution. The 100,000-hour rated life makes the jump worthwhile when the original bulbs have dimmed or failed.
Measured against everything we stock in Headlights & Car Lighting, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | ESTONE |
| Product type | Headlights |
| Color and finish | 6000K (Pure White) |
| Casing color | Black |
| Lens tint | Clear |
| Quality grade | Performance |
| Power | |
| Current control | Yes |
| Current draw | 2 W |
| Forward voltage | 9-14.5 V |
| High power | Yes |
| Working voltage | 12-24 V |
| Size & build | |
| Size | H7 |
| Placement | Driver and Passenger Side, Mounted on Body |
| Main material | ABS |
| Product shape | Round |
| Compatibility | |
| Fitment type | Direct Fit Performance |
| CAN bus compatibility | Yes |
| In the box | |
| Switch included | Yes |
| Bulb included | Yes |
| Includes wiring harness | Yes |
| Environment & compliance | |
| Certification/standards | DOT |
| More details | |
| Beam angle range | 8 to 60 deg |
| Beam or lamp type | Dual Beam |
| Dual polarity | Yes |
| Light color | 6000K (Pure White) |
| Illumination source | LED |
| Lumen output | 3200 |
| V-star rating | 5 |
Other versions of this model
The kit operates on a 9 to 14.5 volt forward voltage range, compatible with standard 12V vehicle electrical systems.
The bulbs use an H7 base and are sold as a set of two for driver and passenger side mounting on the vehicle body.
Installation is plug-and-play with no need to use the original car circuit wires; the kit includes a switch and waterproof IP68 driver and connectors.
More in Headlights & Car Lighting
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?