ESTONE H11/H8/H9 LED Headlight Bulb Set 6500K 8000LM IP68
- 8 to 60 deg
- Headlights
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
H3 LED conversion kit delivers 8000 lumens per set at 6500K with IP68 waterproofing and CSP chips
The ESTONE H3 LED headlight conversion kit replaces factory halogen bulbs with a pair of 6500K cool-white units. Each bulb uses CSP LED chips and draws 25 watts for a combined 50-watt set rated at 8000 lumens. The plug-and-play design includes a built-in driver and switch for straightforward installation on driver and passenger sides.
The sealed driver and connectors meet IP68 waterproof rating so the lamps operate even when submerged. Rated life exceeds 100000 hours with far less heat than halogen or HID equivalents. The fanless construction eliminates moving-part noise while the 9-14.5 volt operating range keeps current draw stable at 2 watts per bulb in normal use.
This kit suits owners of vehicles fitted with H3 bases who want 30 percent more road illumination than a stock halogen bulb without rewiring. It is not for buyers who need a different base type, a warmer colour temperature, or a higher lumen output than 4000 lumens per bulb. Check your vehicle’s bulb size before ordering.
Measured against everything we stock in Headlights & Car Lighting, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | ESTONE |
| Product type | Headlights |
| Color and finish | 6000K (Pure White) |
| Casing color | Black |
| Lens tint | Clear |
| Quality grade | Performance |
| Power | |
| Current control | Yes |
| Current draw | 2 W |
| Forward voltage | 9-14.5 V |
| High power | Yes |
| Working voltage | 12-24 V |
| Size & build | |
| Size | H3 |
| Placement | Driver and Passenger Side, Mounted on Body |
| Main material | ABS |
| Product shape | Round |
| Compatibility | |
| Fitment type | Direct Fit Performance |
| CAN bus compatibility | Yes |
| In the box | |
| Switch included | Yes |
| Bulb included | Yes |
| Includes wiring harness | Yes |
| Environment & compliance | |
| Certification/standards | DOT |
| More details | |
| Beam angle range | 8 to 60 deg |
| Beam or lamp type | Fog-light |
| Dual polarity | Yes |
| Light color | 6000K (Pure White) |
| Illumination source | LED |
| Lumen output | 3200 |
| V-star rating | 5 |
Other versions of this model
Remove the old halogen bulb, insert the H3 LED unit into the housing, and connect the IP68-rated driver directly to the factory plug; the step most people skip is securing the driver with the supplied bracket so vibration cannot loosen the connection.
The CSP LED chips are rated for over 100,000 hours of operation, so no bulb replacement is expected; only occasional lens cleaning and a check that the IP68 seals remain intact after deep-water crossings.
The forward-voltage range tops out at 14.5 V, so a charging system that consistently exceeds that voltage will trigger the driver’s protection circuit before heat becomes an issue.
More in Headlights & Car Lighting
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?