We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

ESTONE

ESTONE OZG2 3-Port SPDIF/Toslink Optical Switch

SKU CH-KA1C-YG8A8

A three-input, one-output SPDIF/Toslink optical switch that routes digital audio from multiple sources to a single receiver with IR remote control.

  • Port count3
  • Adapter typeSPDIF / Toslink Switch
  • Input ports3 x SPDIF
  • Output ports1 x SPDIF
  • Units per package1
  • Product typeSPDIF Switchers
  • Connect three optical sources to one device with 3 inputs and 1 output
  • Control switching from your seat using the included IR remote
  • Transmit audio up to 40 m over fibre with .2 dB per metre loss
  • Hear 5.1 Dolby Digital, DTS and PCM up to 192 kHz sampling
  • Plug in the 5 V USB cable and start — no drivers needed

What the ESTONE OZG2 does

The ESTONE OZG2 is a three-input, one-output SPDIF/Toslink optical audio switch. It lets you connect up to three digital optical sources — such as a game console, Blu-ray player or streaming box — to a single optical input on a soundbar, AV receiver or amplifier. The unit is powered via an included 5V USB cable and can be operated by front-panel buttons or the supplied IR remote with extension cable.

Signal integrity over distance

Optical fibre attenuation is specified at 0.2 dB per metre, allowing a transmission distance up to 40 metres or 130 feet without audible degradation. Supported sampling rates reach 192 kHz for PCM stereo and 96 kHz for compressed formats. The switch passes Dolby Digital and DTS 5.1 bitstreams transparently but cannot carry 7.1-channel Dolby Digital Plus or Dolby TrueHD, as those formats require HDMI bandwidth.

Check your sources and sink

Verify that each source device outputs PCM stereo, Dolby Digital or DTS 5.1 over its optical port; 7.1-channel or high-bitrate codecs will not pass through. Confirm your receiving device has a single SPDIF/Toslink input and can decode the formats you intend to use. A free USB port or 5V USB charger is needed for power, and line-of-sight or the IR extension cable must reach the switch location for remote operation.

How it compares

Measured against everything we stock in HDMI & AV Selector Switches, at today’s prices. Recalculated every night.

Price $14.99
Cheaper than about 90% of the 1,998 comparable items (median $27.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameESTONE
Product lineOZG2
Model nameOZG2
Part numberOZG2
Product typeSPDIF Switchers
Adapter typeSPDIF / Toslink Switch
Product colorBlack
Ports & slots
Port count3
Input ports3 x SPDIF
Output ports1 x SPDIF
Size & build
Product dimensions5.91 × 2.36 × 0.79 in
Product weight11.9 oz
In the box
Units per package1
In the box1 × 3 × 1 Toslink switch.
1 × 5 V USB power cable.
1 x remote control.
1 x IR extension cable.
1 x user manual

Questions about this item

Does the ESTONE OZG2 generate any heat or noise when left on continuously?

The unit is a passive optical switch with no moving parts or active cooling, so it runs silently and produces no noticeable heat during all-day operation.

What cables and power source do I need to have on hand before the switch will work?

You need three Toslink optical cables for the inputs, one Toslink cable for the output, and a standard USB power adapter to supply the included 5 V USB power cable.

Will my older Dolby Digital 5.1 and DTS sources at 48 kHz pass through without conversion?

Yes, the switch transparently passes Dolby Digital, DTS 5.1 and PCM stereo at 32, 44.1, 48, 96 and 192 kHz, so legacy sources work unchanged.

More in HDMI & AV Selector Switches

Similar items