VCE SJ661-100P-CA Cat6 RJ45 Pass Through Connectors 100-Pack
- Ethernet, Male
- Unshielded, Male
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Splits one RJ45 line into three gigabit ports for simultaneous 1000 Mbps connections, powered by an included 80 cm USB cable
The ESTONE OZHW2 is a 1 to 3 Ethernet splitter that expands a single RJ45 connection into three Gigabit ports for simultaneous networking. It suits home or office setups where cabling is limited and multiple wired devices need internet access without running new lines.
The adapter requires constant USB power to operate and cannot function without the supplied 0.8 metre cable connected to a stable power source. Each of the three ports supports up to 1000 Mbps throughput with no crosstalk between cable sets, though total bandwidth is shared across active devices.
Setup is plug and play with no IP assignment or configuration needed; simply connect the USB power cord and link the three devices. Note that IPTV signals are not supported and the splitter does not act as a managed switch, so it cannot prioritise traffic or isolate ports.
Measured against everything we stock in Network Adapters & RJ45 Plugs, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ESTONE |
| Model name | OZHW2 |
| Product type | Ethernet Splitter 1 to 3 RJ45 Network Adapter |
| Adapter type | Gigabit RJ45 Ethernet Splitter 1 to 3 |
| Ports & slots | |
| Connector type | RJ45 |
| Size & build | |
| Product dimensions | 4.02 × 3.74 × 1.06 in |
| Product weight | 3.2 oz |
| In the box | |
| In the box | RJ45 Ethernet Splitter X1 USB Power Cord X1 |
The splitter runs from a 0.8 m USB cable and uses passive components; no active cooling is fitted, so it stays at room temperature during continuous use.
A USB-A port or 5 V USB charger is required; the included 0.8 m cable plugs into any standard USB power socket.
Yes, the three female RJ45 jacks accept Cat 5, 5e, 6, 7 and 8 cables for gigabit speeds.
More in Network Adapters & RJ45 Plugs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?