VCE SJ661-100P-CA Cat6 RJ45 Pass Through Connectors 100-Pack
- Ethernet, Male
- Unshielded, Male
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Splits one RJ45 port into two 1000 Mbps connections and requires USB power via the included 80 cm cable
The ESTONE OZHW3 adapter splits a single RJ45 socket into two 1000Mbps ports, allowing two devices such as computers, televisions or set-top boxes to share one wired internet link. It supports Cat 5 through Cat 8 cables and operates as a passive physical-layer splitter without assigning IP addresses. The unit requires the supplied USB power cable to function and does not support IPTV signals.
A 80cm USB charging cable is included and must be connected to a power source for stable operation; the splitter cannot work without this connection. Power draw is minimal and the device runs silently with no moving parts, so it adds no audible noise to a home or office environment. The compact enclosure measures 4.02 x 3.74 x 1.06 inches and weighs 3.2 ounces.
The package provides the splitter and the USB power cord, so no additional accessories are needed to start sharing a gigabit connection. Plug-and-play operation means no software installation or configuration is required, and the physical connection ensures the two ports do not interfere with each other during simultaneous data transfer.
Measured against everything we stock in Network Adapters & RJ45 Plugs, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ESTONE |
| Model name | OZHW3 |
| Product type | Ethernet Splitter 1 to 2 RJ45 Network Adapter |
| Adapter type | Gigabit RJ45 Ethernet Splitter 1 to 2 |
| Ports & slots | |
| Connector type | RJ45 |
| Size & build | |
| Product dimensions | 4.02 × 3.74 × 1.06 in |
| Product weight | 3.2 oz |
| In the box | |
| In the box | RJ45 Ethernet Splitter X1 USB Power Cord X1 |
Connect one incoming RJ45 cable to the single port and two outgoing cables to the dual ports, then plug the included 80cm USB power cord into a stable USB power socket; the device cannot operate without this power connection.
The unit has no moving parts or replaceable modules; keep the gold-plated RJ45 contacts clean and ensure the USB power cord remains firmly seated, replacing the cord only if it becomes damaged.
Total throughput is shared across the two ports at up to 1000Mbps, so simultaneous heavy transfers on both ports will divide the available bandwidth rather than delivering full gigabit speed to each device.
More in Network Adapters & RJ45 Plugs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?