We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Spoolless matte PLA coil in deep black, 1.75 mm diameter

eSUN

eSUN Matte PLA Refillament 1.75 mm 1 kg Deep Black

SKU CH-7Y1H-2FJY7

Spoolless matte PLA filament in deep black delivers 1.75 mm diameter, low warping and reduced layer lines for FDM printers

  • Diameter1.75 mm
  • Product colorBlack
  • Main materialPLA
  • Compatible systemsFor FDM 3D Printer
  • Matte finish hides layer lines for cleaner prints
  • High toughness reduces breakage on functional parts
  • 75 mm diameter with tight tolerance feeds smoothly
  • Prints at 190–230 °C with 215 °C recommended
  • Spoolless 1 kg refill cuts waste and works with common holders

Spoolless PLA filament for FDM printers

This eSUN Matte PLA refill arrives as a 1 kg coil without a built-in reel, so it must be used with a separate spool holder such as the Bambu Lab or upcoming eSUN model. The matte formulation reduces visible layer lines and produces a smooth, non-glossy surface on printed parts.

Printing temperature range and bed adhesion

The material prints between 190 and 230 °C with a recommended nozzle temperature of 215 °C. Adhesion works well on textured paper, PVP solid glue or PEI build surfaces, giving consistent first-layer bonding and minimal warping during normal prints.

Dimensional stability during long prints

A tight 1.75 mm diameter tolerance and low warping keep extrusion steady over extended jobs, reducing stringing and nozzle clogging. Vacuum-sealed packaging with desiccant preserves dryness, so the filament feeds cleanly from start to finish on large models.

How it compares

Measured against everything we stock in 3D Printer Filament, at today’s prices. Recalculated every night.

Price $13.99
Cheaper than about 93% of the 305 comparable items (median $27.99).

Specifications

Product
Brand nameeSUN
Product colorBlack
Size & build
Main materialPLA
Diameter1.75 mm
Compatibility
Compatible systemsFor FDM 3D Printer

Questions about this item

How do I install the spoolless refill on my printer and what step causes feeding issues?

Place the coil on a compatible spool holder such as the Bambu Lab holder or the upcoming eSUN holder, then feed the 1.75 mm filament into the extruder; the mistake is skipping the holder and letting the loose coil tangle.

What maintenance will this filament need after the bag is opened?

Store the coil in the vacuum bag with the desiccant when not printing; if the material absorbs moisture, dry it before use to avoid bubbles and stringing.

What limit appears first during a long print at high temperature?

Printing above 230 °C risks heat creep and nozzle clogging, so stay within the 190–230 °C window for consistent feeding.

More in 3D Printer Filament

Similar items