ETopSell Internal Mini SAS Cable SFF-8087 36-Pin Male-to-Male 1.6ft
A 1.6ft SFF-8087 36-pin male-to-male cable linking SAS or SATA devices inside servers and RAID controllers
- Mini SAS 36-pin SFF-8087 male connectors link RAID controllers and HBA cards
- 6 ft length keeps internal server routing short and tidy
- AWG30 high-bandwidth low-skew wire supports up to 6 Gbps per channel
- 100 Ohm impedance maintains signal integrity across the link
- 100 % inspected and visually checked before packing for reliable quality assurance
Internal Mini SAS Cable 1.6ft
The ETopSell SFF-8087 cable connects two Mini SAS 36-pin male ports inside a server or storage chassis. It links RAID controllers, SAS or SATA HBAs and backplanes for direct-attached storage. The 1.6 foot length suits tight internal routing between adjacent devices. Builders needing longer runs or external connectors should choose a different cable.
Sustained 6Gbps per channel throughput
AWG30 high-bandwidth low-skew wire maintains 100 Ohm impedance for reliable signalling at up to 6Gbps per lane. The construction supports continuous data transfer across all channels without the signal degradation seen in lesser cables during extended workloads. Error-free operation is verified by 100% inspection before packing.
Low-profile passive thermal profile
As a passive copper assembly the cable adds no active cooling requirement and generates no audible noise. Power draw is limited to the signalling current of the attached controllers. The slim black jacket fits cleanly in dense drive bays without obstructing airflow to nearby components.
How it compares
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 96% of the 1,224 comparable items (median $26.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the 1.6ft SFF-8087 cable generate noticeable heat or draw extra power when running continuously in a server?
The passive AWG30 cable carries signals only and does not consume power or produce measurable heat during all-day operation.
What controller or backplane must I already have to use this Mini SAS 36-pin male-to-male cable?
You need a RAID controller, SAS/SATA HBA or server backplane with a matching SFF-8087 36-pin female port on each end.
Can this 6Gbps-per-channel Mini SAS cable work with older 3Gbps SAS or SATA drives in the same enclosure?
Yes, the SFF-8087 link auto-negotiates to 3Gbps so legacy drives operate normally alongside newer ones.
More in SAS, SCSI, InfiniBand & MCIO Cables
Similar items
Mellanox Technologies MFA1A00-E001 LinkX InfiniBand cable QSFP+ 3.28 ft
Sonnet Multilane SAS Cable 2m
- Data Transfer Cable
- 6.56 ft (2 m)
EN-Labs SFF86434SATA50CM SAS cable SFF-8643 to 4 SATA 50 cm 12 Gbps
- SFF-8643 to SATA
- Black & Blue





