We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ash Mini SAS SFF-8087 to four SFF-8482 cables with braided sleeve and 4-pin power leads

ETopSell

ETopSell Mini SAS SFF-8087 to 4× SFF-8482 3 ft

SKU CH-58V0-4KWGN

Connects a Mini SAS SFF-8087 host to four SFF-8482 drives at 6.0 Gbps with integrated power

  • Product colorAsh
  • Overall length3 ft (0.91 m)

Length 3 ft.

  • SFF-8087 host connects four SFF-8482 drives
  • SAS 3.0 cable rated for 6.0 Gbps speeds
  • 30 AWG tinned copper with 100 ohm impedance
  • Braided mesh sheath preserves case airflow
  • Integrated 4-pin power feeds each drive

Host-to-Drive Connectivity

This internal cable bridges a host or RAID controller equipped with a 36-pin SFF-8087 mini-SAS port to four SAS hard drives using 29-pin SFF-8482 connectors. It also supplies drive power through an integrated 4-pole power lead. The assembly supports SAS 3.0 signalling at up to 6.0 Gbps per lane.

Builders with SFF-8087 Controllers

Suitable for installers who need to fan out a single mini-SAS 4i lane into four direct-attached SAS drives inside a chassis. Not for systems whose host side uses a different mini-SAS pin count or whose target drives lack a 29-pin SAS interface. The fixed 3 ft length may not reach distant drive bays in larger enclosures.

100 Ohm Impedance

The 30AWG tinned-copper conductors are built to a controlled 100 ohm differential impedance, which preserves signal integrity at 6.0 Gbps across all four lanes. This specification determines whether the cable meets the electrical requirements of a given SAS 3.0 controller and drive combination.

How it compares

Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.

Price $11.99
Cheaper than about 91% of the 1,224 comparable items (median $26.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product colorAsh
Size & build
Overall length3 ft (0.91 m)

Other versions of this model

1 more in the same range

Questions about this item

What host controller connector does this cable require to work?

The cable plugs into a host or RAID controller with an SFF-8087 36-pin mini SAS port.

Can I attach older SAS drives that use the SFF-8482 interface?

Yes, each of the four target ends is a 29-pin SFF-8482 connector designed for SAS drives using that interface.

How do I verify the link is running at the rated 6.0 Gbps per lane?

Check the controller BIOS or operating-system drive utility; it should report a 6.0 Gbps SAS 3.0 link on each of the four lanes.

More in SAS, SCSI, InfiniBand & MCIO Cables

Similar items