We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular motorcycle USB charger with red LED voltmeter display, dual ports, waterproof covers and handlebar mount

EXTRACTME Motorcycle USB Charger 6.4A Dual USB-C PD USB-A QC 3.0 Voltmeter Switch Waterproof

SKU CH-38WK-PGKGJ

Dual-port motorcycle charger delivers 6.4 A total output with USB-C PD and USB-A QC 3.0, includes voltmeter, on/off switch and waterproof cover for 12–24 V systems

  • Dual-port fast charging delivers up to 30W USB-C PD and 18W USB-A QC 3.0
  • Real-time red LED voltmeter monitors 6-30V battery health while you ride
  • Integrated ON/OFF switch cuts power to voltmeter and ports to prevent drain
  • Waterproof rubber covers protect both ports from rain, dust and splashes
  • Fits 1.9-2.2cm handlebars or direct battery connection via fused SAE harness

Motorcycle USB Charger for Dual Fast Charging

The EXTRACTME motorcycle USB charger delivers up to 6.4A total output through a 30W USB-C PD port and an 18W USB-A QC 3.0 port. It accepts DC 12V-24V input and monitors battery voltage from 6-30V via a red LED voltmeter. An integrated ON/OFF switch controls both the voltmeter and USB ports to prevent battery drain when parked. The unit mounts on handlebars measuring 1.9-2.2cm diameter or via screw mounting, and includes a 10A fused SAE-to-ring-terminal harness for direct battery connection.

Suited for Riders Needing Simultaneous Device

This charger suits motorcyclists who want to power a phone and a tablet or GPS at the same time while monitoring battery health on the move. The waterproof silicone covers protect the ports during rain or when the bike is stored outside. Buyers whose handlebars fall outside the 1.9-2.2cm range should look at other mounting solutions. Riders who require a hard-wired installation without an SAE connector will need a different wiring approach.

Sustained Output with Voltage Monitoring

Under continuous load the charger maintains 5V-3.4A, 9V-2.5A or 12V-2A on USB-A and 5V-3.4A, 9V-3A or 12V-2.5A on USB-C. The red LED voltmeter updates in real time so the rider can watch system voltage drop under load and spot a failing battery before it leaves them stranded. The ON/OFF switch cuts all parasitic draw during long stops, preserving the battery for the next start. ABS housing and rubber port covers keep moisture and dust from degrading the internal circuit over repeated daily use.

How it compares

Measured against everything we stock in Charging Stations & Cables, at today’s prices. Recalculated every night.

Price $26.99
Pricier than about 70% of the 9,983 comparable items (median $18.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEXTRACTME

Questions about this item

Will the 10A fuse SAE-to-ring-terminal harness connect directly to my 12V motorcycle battery?

Yes, the included harness has a 10A fuse and ring terminals that bolt to a 12V battery, and the charger accepts 12V-24V input.

My handlebar measures 0.75 inch — will the clamp fit without an adapter?

The clamp fits bars from 0.75 to 0.87 inch (1.9-2.2 cm), so a 0.75-inch bar is at the minimum supported size.

After wiring, what voltage should the red LED voltmeter show with the engine running?

A healthy 12V system typically reads above 12V when running; the display covers 6-30V so you can confirm the charging system is working.

More in Charging Stations & Cables

Similar items