We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small cylindrical steel HVAC motor with stud mounting visible

FASCO

FASCO D1119 HVAC Motor 3.3 In 1/90 HP 240V CCW

SKU CH-66Y2-6BZHW

Replacement shaded-pole motor rated 1/90 hp at 240 V with 300 RPM and CCW rotation

  • Product typeClosed Base
  • OEM replacement motor fits existing HVAC units
  • 1/90 HP shaded-pole design delivers 10 W output
  • 240 V AC single-phase supply with 0.4 A draw
  • Auto thermal protection guards against overheating
  • CCW shaft rotation suits direct-drive fan assemblies

Replacement HVAC Motor

The FASCO D1119 is a shaded-pole motor built as an OEM replacement for HVAC equipment. It operates on single-phase 240 V AC power at 60 Hz and turns counter-clockwise when viewed from the shaft end.

1/90 HP Output and Thermal Limits

Rated at 1/90 HP and 10 W output, the motor draws 0.4 A at full load and runs at 300 RPM. Auto thermal protection and Class B insulation allow operation up to a 40 °C ambient temperature, but the unit is not usable at 208 V or 200 V supplies.

3.3-Inch Frame with Stud Mounting

The 3.3 frame uses a closed-base steel housing and an open air-over enclosure. Stud mounting fixes the motor in place, so the installer must verify that the existing bracket matches this pattern.

How it compares

Measured against everything we stock in Fan Motors, Parts & Clip-On Fans, at today’s prices. Recalculated every night.

Price $72.99
Pricier than about 60% of the 473 comparable items (median $38.99).

Specifications

Product
Brand nameFASCO
Product typeClosed Base

Questions about this item

Will the 3.3 inch frame and stud mounting match the bracket on my existing furnace blower?

The motor uses a 3.3 frame with stud mounting; verify your blower housing accepts this frame size and stud pattern before installation.

How can I confirm the motor is running correctly once wired to 240V?

At 240V AC the motor should draw about .4 amps at full load and turn at 300 RPM in a CCW direction when viewed from the shaft end.

Does the box include a capacitor or mounting hardware, or must I buy them separately?

The motor is supplied as an open air‑over unit with a closed base; no capacitor, mounting bolts or wiring harness are included.

More in Fan Motors, Parts & Clip-On Fans

Similar items