Fervit 19/20Pin Motherboard Header to USB 3.0 Dual Port Female Screw Mount 90° Down Angled Cable 30cm

Front-panel USB 3.0 expansion

This Fervit adapter converts a single 19/20-pin motherboard header into two screw-mount USB 3.0 Type-A ports. It targets builders adding front-panel connectivity to cases that lack native USB 3.0 cut-outs or need extra ports for external drives and peripherals. The 30 cm cable reaches most front-panel layouts without excess slack.

Sustained 5 Gbps throughput

Rated at 5 Gbps, the link supports simultaneous two-way data transfer rather than burst-only speeds. Real-world throughput stays consistent during large file copies or backups because the header-to-port path adds no protocol conversion overhead. Builders relying on continuous reads from external SSDs will not encounter thermal throttling from the cable itself.

Screw-mount security and angled clearance

Two mounting holes on the female end let you bolt the ports to a chassis bracket or custom panel, preventing port wiggle during frequent insertions. The 90-degree down-angled connector seats flush against the motherboard header, clearing tall capacitors or shrouds that would block a straight plug. This orientation also reduces strain on the header pins when the front panel is removed for maintenance.