Fervit DC 5.5×2.1 mm to USB-C Angled 90° 140W Adapter
Converts a 5.5×2.1 mm DC jack into a 140 W USB-C PD output with a 90° angled plug for tight spaces
- Delivers up to 140W via USB-C with built-in PD trigger
- Accepts 18–20V DC barrel input for high-power laptop chargers
- 90° angled plug fits tight spaces around crowded ports
- Supports 65W, 100W and 140W devices across laptops, tablets and phones
- Offers multiple PD profiles including 20V/7A for maximum charging speed
DC-to-USB-C power adapter
The Fervit adapter converts a 5.5 × 2.1 mm DC barrel jack into a 90-degree USB-C plug, letting you power laptops, tablets and phones from a compatible DC source. It is aimed at users who need to repurpose an existing 135 W or 140 W DC charger for USB-C devices without carrying a separate power brick. The angled connector fits tight spaces around crowded ports where a straight plug would not seat properly. Verify your device's rated voltage and current before connecting to avoid damage.
Thermals noise and power draw
The unit accepts DC input between 18 V and 20 V at up to 140 W and delivers a maximum 140 W output through negotiated USB Power Delivery and Quick Charge 2.0 or 3.0 profiles. Supported output steps include 5 V at 2 A, 9 V at 3 A, 15 V at 2 A, 20 V at 3.25 A, 20 V at 5 A and 20 V at 7 A, matching 65 W, 100 W and 140 W device requirements. A built-in PD emulator trigger handles the handshake so the source supplies the correct voltage. No fan or active cooling is present; the adapter relies on passive heat dissipation during normal operation.
What the angled plug and trigger chip change
The 90-degree USB-C head lets you plug into recessed or side-mounted ports where surrounding plastics or cables block a straight connector, reducing strain on the port and cable. The internal 140 W DC 20 V 7 A PD emulator trigger automates voltage negotiation, so the adapter requests the highest compatible profile without manual switching. This means a single DC charger can serve a 140 W laptop, a 100 W ultraportable and a 65 W tablet in turn, provided each device's specifications fall within the supported output range.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $17.99
- Pricier than about 70% of the 15,227 comparable items (median $14.99).
Specifications
| Product | |
|---|---|
| Brand name | Fervit |
Questions about this item
How do I install the 5.5×2.1 mm DC plug and USB-C connector, and what is the common mistake?
Insert the DC plug fully into the 18-20 V source, then connect the angled USB-C end to the device; the step people miss is confirming the source delivers 20 V before plugging in, otherwise the adapter cannot trigger the 140 W profile.
What maintenance or replacement will this adapter need over time?
No scheduled maintenance is required; replace the unit if the DC jack or USB-C connector becomes loose, shows bent pins, or if the housing cracks from repeated angled insertion.
What limit appears first during sustained 140 W use?
The 20 V 7 A output ceiling is the first hard limit; if the load demands more than 7 A at 20 V the adapter cannot supply it and the device will throttle or stop charging.
More in USB Cords & Extension Cables
Similar items
STARTECH USB2CB1M USB 2.0 Type-C to Type-B Cable 1m
- Connector on First…
- See Details
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
Vszerda USB 3.1 Type-E 20Pin to USB 2.0 2×9pin Hub Adapter
- Usb 2.0
- USB 2.0





