Fervit Motherboard 9Pin 10Pin to Dual USB 2.0 Male Cable 50cm
Converts a 10-pin motherboard header into two USB 2.0 male ports with a 50cm cable supporting 480MBit/s speeds
- Add two USB 2.0 ports from one motherboard header
- 50 cm cable reaches front-panel or rear brackets
- Direct plug-in design needs no extra adapters
- Supports 480 Mbit/s transfer on each port
- Fits any standard 9-pin or 10-pin USB 2.0 header
Internal header to dual USB 2.0 adapter
This 50 cm cable converts a single 9-pin or 10-pin motherboard header into two standard USB 2.0 Type-A male ports. It is aimed at builders who need extra front-panel or rear connections without occupying a PCI bracket. The compact design plugs directly into the header and requires no extra brackets or screws.
Sustained throughput on USB 2.0
The link operates at the USB 2.0 specification with a maximum signalling rate of 480 MBit/s. Under continuous transfer the bandwidth is shared between the two ports, so simultaneous heavy use on both connectors will reduce per-port speed. The cable adds no active circuitry, so latency and power delivery follow the motherboard header limits.
Header layout and clearance check
Verify that your board provides a standard 9-pin or 10-pin USB 2.0 header with the common pinout before ordering. Ensure 50 cm of routing space exists from the header to the desired port location without stretching the cable. The splitter occupies only the single header; no additional internal connectors or power feeds are needed.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Typical for this category: the median of 15,227 items is $14.99.
Specifications
| Product | |
|---|---|
| Brand name | Fervit |
Questions about this item
Does the 50 cm cable add noticeable heat or power draw when the two USB 2.0 ports run all day?
The adapter is a passive cable, so it adds no active heat and draws only the tiny current the connected USB 2.0 devices require.
What must my motherboard already have for this Fervit cable to work?
A free 9-pin or 10-pin internal USB 2.0 header on the mainboard.
Will the 480 Mbit/s link work reliably with older USB 1.1 peripherals I still use?
Yes, the USB 2.0 interface is backward compatible, so legacy USB 1.1 devices will operate at their native speed.
More in USB Cords & Extension Cables
Similar items
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black
STARTECH UUSBHAUB3RA USB 2.0 A to Right Angle Micro B Cable 3 ft 91 cm
- USB A to Micro USB
- USB 2.0
ESTONE PQ006 USB4 cable 3.3FT 240W 40Gbps 8K@60Hz Thunderbolt 3/4 black
- USB C to USB C
- USB4
STARTECH USB3SEXT6BK usb cable
- Connector on First…
- Data Transfer Cable
Jansicotek PQ005 USB4 cable 240W 40Gbps 8K 60Hz right angle 3.3FT
- USB C to USB C
- USB4





