Fervit USB 2.0 to SATA 15-pin power cable 30 cm 2.5 inch 5V 2A

Fervit USB 2.0 SATA power cable for 2.5 inch drives

This Fervit cable delivers DC 5V power from a USB 2.0 port to a standard SATA 15-pin connector on a 2.5 inch HDD or SSD. It supports a maximum current of 5V 2A and requires no additional software drivers. The cable is approximately 30 cm long and uses pure copper conductors for reliable power transmission. It provides power only and carries no data signals.

Sustained power delivery within 2A limit

The pure copper conductors maintain stable 5V output for continuous drive operation as long as the connected 2.5 inch drive stays within the 2A maximum rating. Power flows directly from the USB source without conversion overhead, so performance depends on the host port's ability to supply consistent current. No active electronics are present to throttle or regulate output beyond the cable's physical capacity. Extended use is limited by the USB port's own thermal and current limits.

Check drive size and USB port capability

Verify that the target drive is a 2.5 inch SATA model, as the cable does not work with 3.5 inch or 5.25 inch devices. Confirm the host USB port can supply at least 5V 2A to match the cable's maximum rating and the drive's peak demand. Ensure the drive requires only a standard SATA 15-pin power connection and does not need a separate data link through this cable. The 30 cm length restricts placement to positions close to the USB power source.