Fervit USB 3.0 Type-A to USB-C OTG coiled cable 100cm

Fervit USB 3.0 Type-A to USB-C coiled cable

This Fervit cable connects a USB 3.0 Type-A host to a USB-C device using a coiled design that stretches to 100 cm. It supports OTG functionality for direct device-to-device links such as external SSDs or cameras. The gold-plated connectors and welded ends are built to resist damage from accidental pulls. An aluminium alloy shell keeps the assembly light and portable.

Check your host and device ports before ordering

Verify that the host side provides a standard USB 3.0 Type-A receptacle and that the peripheral uses a USB-C plug. The cable delivers up to 5 Gbps throughput only when both ends operate at USB 3.0; a USB 2.0 port will limit speed to the older standard. Ensure the connected device supports OTG if you plan host-free transfers. No driver installation is required for typical mass-storage or camera gadgets.

Coiled cable for tidy desk and mobile setups

The professional reversed coil extends when needed and retracts to prevent tangled wires on a crowded bench or in a bag. Single-piece moulded construction and heavy cable ends add strain relief for frequent connect-disconnect cycles. The 100 cm stretched length suits close-range links between a laptop and an external drive or camera rig. Aluminium shells dissipate heat during sustained transfers while staying light enough for travel kits.