Fervit USB 3.1 Type-E to USB 2.0 9Pin 10Pin Header Adapter
Converts a motherboard USB 2.0 header to a USB 3.1 front-panel header with a compact, direct-fit adapter
- Converts a USB 2.0 header to a USB 3.1 front-panel port
- Compact design plugs directly into the motherboard with no extra parts
- Vertical USB 2.0 front-panel socket for easy case connection
- Vertical USB 3.1 front-panel header supports newer front-panel devices
- Simple converter adapter extends front-panel USB connectivity from existing headers
Front-panel header adapter
The Fervit adapter converts an available motherboard USB 2.0 front-panel header into a vertical USB 3.1 front-panel header. It plugs directly onto the board without extra cables or brackets. The compact design fits tight internal layouts. Builders adding a USB 3.1 front-panel port use this to bridge the header mismatch.
Compatibility check
Verify that your motherboard has a free USB 2.0 9-pin or 10-pin front-panel header before ordering. The adapter requires that specific header type to function. Confirm your case front-panel connector matches the vertical USB 3.1 socket on the adapter. No additional power or software drivers are needed for the conversion.
What the adapter changes
The adapter lets you connect a modern USB 3.1 front-panel cable to an older USB 2.0 motherboard header. It does not increase the signalling speed beyond USB 2.0 limits. The physical connector changes from 9-pin or 10-pin to the vertical USB 3.1 key-A header. Data throughput remains at the USB 2.0 rate of the source header.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Typical for this category: the median of 15,227 items is $14.99.
Specifications
| Product | |
|---|---|
| Brand name | Fervit |
Questions about this item
What comes in the box with the Fervit USB 3.1 Type-E to USB 2.0 header adapter?
The box contains the compact adapter only; no extra cables, brackets or mounting hardware are included.
Should I choose a 9-pin or 10-pin version of this adapter for my motherboard?
The adapter fits a standard 9-pin USB 2.0 front-panel header; the 10-pin reference simply describes the keyed USB 3.1 header it converts to.
What real-world transfer speed will I get through this adapter once it is installed?
The link runs at USB 2.0 speeds because the motherboard header supplies only a USB 2.0 signal.
More in USB Cords & Extension Cables
Similar items
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
ESTONE PQ006 USB4 cable 3.3FT 240W 40Gbps 8K@60Hz Thunderbolt 3/4 black
- USB C to USB C
- USB4
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
Jansicotek PQ005 USB4 cable 240W 40Gbps 8K 60Hz right angle 3.3FT
- USB C to USB C
- USB4





