We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two USB-C solder connectors, male and female, each with 18-pin PCB attached

Fervit

Fervit USB-C 3.1 Solder Connector Kit Male Female 18pin 65W 2pcs

SKU CH-1T1T-R9EWA

DIY solder-type USB-C male and female connectors with 18-pin PCB supporting 10 Gbps data and 65 W power delivery

  • Supports 10Gbps data rates with USB 3.1 compliance
  • Delivers up to 65W power at 20V 3.25A
  • Reversible Type-C male and female connectors included
  • 18-pin PCB layout enables high-speed data and power
  • DIY solder assembly requires manual soldering proficiency

DIY Solder Type-C Connector Kit

This kit supplies one USB-C male plug and one female socket, each mounted on an 18-pin PCB for hand soldering. It carries USB 3.1 data up to 10 Gbps and delivers up to 65 W of power at 20 V 3.25 A. The parts are new and intended for builders who want to create or repair their own USB-C cables or device ports.

For Solder-Skilled Makers, Not Plug-and-Play Users

The connectors suit hobbyists and technicians comfortable with fine-pitch soldering on a small PCB. They are not suited to anyone who needs a ready-to-use cable, lacks soldering equipment, or wants a connector that snaps on without tools.

18-Pin PCB Pinout for 10 Gbps and 65 W

The 18-pin layout is the single spec that decides fit: it must match the pin assignment of the cable or board you are joining. If your project requires a different pin count or a pre-crimped lead, this kit will not work.

How it compares

Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.

Price $14.99
Typical for this category: the median of 15,227 items is $14.99.

Specifications

Product
Brand nameFervit

Questions about this item

What does the 10 Gbps rating mean once the connector is soldered into a cable?

The 10 Gbps rating is the maximum data throughput the connector supports when built into a USB 3.1 Gen 2 link. Actual speed depends on the host controller, cable quality and the device you connect.

Which USB standard does the 18-pin PCB layout follow and what does it limit?

The 18-pin layout follows the USB 3.1 specification, capping data at 10 Gbps and power delivery at 65 W (20 V at 3.25 A) when used with a compatible 65 W source and device.

What physical work is needed to mount each connector?

Each connector arrives with an attached 18-pin PCB; you must solder the cable wires to those pads yourself, so a fine-tip soldering iron, flux and steady hands are required.

More in USB Cords & Extension Cables

Similar items