Klein Tools 85191 Conduit Reaming Screwdriver 5/16 tip 13 19 25 mm
- Card
- * Hooded-blade desi…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Proportional pressure control valve regulates 0.02 to 2 bar with 1900 l/min flow, IP65 protection, and 18–30 V DC operation
The Festo VPPM-12L-L-1-G12-0L2H-LK-S1 is a pilot-controlled diaphragm regulator for precise pneumatic pressure management. It suits automation engineers and maintenance technicians who need repeatable 3-way proportional control in industrial systems. The valve delivers a standard nominal flow rate of 1900 l/min with a regulation range of 0.02 bar to 2 bar. Linearity error is 1 % FS and repetition accuracy reaches 0.5 % FS.
Verify that your supply voltage sits between 18 V and 30 V DC and that the source can provide up to 500 mA continuous current. The inlet pressure must stay within 0 bar to 4 bar while the medium temperature remains between 10 °C and 50 °C. Ensure the installation environment does not exceed 60 °C ambient. The G1/2 port thread and 12 mm nominal width must match your existing manifold or tubing layout.
The red enclosure weighs 2050 g and carries an IP65 degree of protection against dust and water jets. Short-circuit and reverse-polarity protection cover all electrical connections for wiring safety. A mechanical spring provides the reset method, while the LED display offers local status indication. Mounting position is unrestricted, allowing any orientation during installation.
Measured against everything we stock in Electrical Trade Tools & Kits, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | FESTO |
| Model name | VPPM-12L-L-1-G12-0L2H-LK-S1 |
| Product type | Test Equipment |
| Color and finish | Red |
| In the box | |
| Number of items | 1 pack |
The valve is supplied as a single unit in a box; pneumatic fittings for G1/2 connections and a compatible 18 V to 30 V DC power cable must be sourced separately.
This model regulates from 0.02 bar to 2 bar with a 1900 l/min nominal flow, making it suited for fine low-pressure adjustment rather than higher-range variants.
It indicates the standard nominal flow at 6 bar inlet dropping to 5 bar; actual flow will vary with your inlet pressure between 0 bar and 4 bar and the 0.02 bar to 2 bar outlet setting.
More in Electrical Trade Tools & Kits
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?