Klein Tools 85191 Conduit Reaming Screwdriver 5/16 tip 13 19 25 mm
- Card
- * Hooded-blade desi…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 24 V DC pneumatic solenoid valve with 400 l/min flow, IP65 protection and 18 mm width
The Festo VSVA-B-T32U-AZH-A2-1R2L is a 2x3/2 normally-open monostable solenoid valve built for machine builders and maintenance engineers who need reliable directional control in tight cabinets. Electrical pilot actuation with external pilot supply gives consistent switching across the 3 to 10 bar operating range. IP65 protection and a 100 % duty cycle suit continuous industrial cycles.
The optimised concatenated flow rating of 400 l/min defines the practical throughput when valves are ganged on a manifold; individual sub-base flow reaches 450 l/min and the valve body alone 600 l/min. Switching times of 10 ms on and 22 ms off set the cycle-speed ceiling for sequencing applications. Operating voltage must stay within 21.6 to 26.4 V DC and pilot pressure between 3 and 8 bar for specified performance.
Soft sealing and overlap lap reduce internal leakage while the non-detenting manual override allows momentary jog without locking. LED signal display gives immediate coil-state visibility during commissioning. Any mounting orientation and flow-control exhaust option simplify manifold layout and tube routing. Compressed air quality to ISO 8573-1:2010 [7:4:4] is required; oil-lubricated operation is permitted.
Measured against everything we stock in Electrical Trade Tools & Kits, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | FESTO |
| Model name | VSVA-B-T32U-AZH-A2-1R2L 534782 |
| Product type | Test Equipment |
| Color and finish | Red |
| In the box | |
| Number of items | 1 pack |
This model delivers 400 l/min nominal flow and 600 l/min maximum; choose it when your circuit needs that capacity.
It is the optimised flow when valves are pneumatically concatenated; on a single sub-base you can expect 450 l/min.
The coil runs on 21.6–26.4 V DC with a 1.0 W low-current and 2.4 W high-current phase, drawing full power at 100 % duty cycle.
More in Electrical Trade Tools & Kits
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?