We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Multicolour PLA filament spool, 1.75 mm, 1 kg, glossy finish

FlashForge Rapid PLA 1.75mm Rainbow Candy 1kg

SKU CH-JRXD-V260Z

1.75 mm PLA filament on a 1 kg spool prints up to 500 mm/s with ±0.02 mm diameter accuracy and 200–220 °C extrusion temperature

  • Diameter1.75
  • Product colorRainbow Candy
  • Main materialPLA
  • Product weight1 kg
  • Prints up to 500 mm/s with rapid melting and smooth flow
  • Maintains layer adhesion and low shrinkage for stable dimensions at speed
  • Enhanced winding cuts tangles and blockages for uninterrupted runs
  • Strong first-layer adhesion and bridging without pre-drying or tweaks
  • CCD-controlled diameter stays within ±0.02 mm for consistent extrusion

High-Speed PLA Filament

FlashForge Rapid PLA is a 1.75mm Rainbow Candy filament designed for high-speed 3D printing on compatible machines. It supports print speeds up to 500mm/s with a dimensional accuracy of +/- 0.02mm for consistent extrusion.

Upgrade from Standard PLA

This filament replaces standard PLA when faster production is needed without sacrificing layer adhesion or surface detail. The jump is worth it for users printing at speeds above 250mm/s who want reduced tangling and reliable bridging without pre-drying or extensive parameter tuning.

1kg Spool Capacity

A 1kg spool comfortably handles multiple large models or extended print farms running at 40-500mm/s with nozzle diameters of 0.4mm or 0.6mm. It runs out when printing very large single parts continuously at the highest speeds or when a project demands a different material property such as higher temperature resistance.

How it compares

Measured against everything we stock in 3D Printer Filament, at today’s prices. Recalculated every night.

Price $32.99
Pricier than about 63% of the 305 comparable items (median $27.99).

Specifications

Product
Brand nameFlashForge
Product colorRainbow Candy
Size & build
Main materialPLA
Diameter1.75
Product weight1 kg

Questions about this item

What extruder temperature range works with this 1.75 mm Rainbow Candy PLA?

The filament prints at 200-220 °C, so set the hot-end inside that window for reliable melting and flow.

Which nozzle size is recommended for the 500 mm/s high-speed profile?

Use a 0.4 mm nozzle; the supplied speed table lists 40-500 mm/s for that diameter.

When should the 1 kg spool be replaced during a long print run?

Replace it once the remaining length drops below what the current job needs; the spool holds 1 kg of 1.75 mm filament with ±0.02 mm tolerance.

More in 3D Printer Filament

Similar items