We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver steel cine stand with leveling leg and combo head, adjustable from 5.2 to 13.3 feet, four sections 30 to 45 mm diameter

Flashpoint Brand

Flashpoint Brand 13.3' High Cine Stand Pro with Leveling Leg and Combo Head, Silver

SKU CH-8G1V-MB868

A steel lighting stand with leveling leg and combo head adjusts from 5.2 to 13.3 feet and supports 31.1 to 40 lbs

  • Stable on uneven ground thanks to a built-in leveling leg
  • Durable steel construction with a silver finish resists wear
  • Adjustable height from 5.2 ft to 13.3 ft with a versatile combo head
  • Supports loads between 31.1 lbs and 40 lbs for heavy gear
  • Four-section columns ranging from 30 mm to 45 mm diameter

Superior Stability for Studio Lighting

The Flashpoint Brand 13.3' High Cine Stand Pro provides a secure platform for professional lighting and camera equipment in studio or on-location settings. Its steel construction and integrated leveling leg keep heavy gear balanced on uneven floors. The combo head allows versatile mounting for a wide range of studio accessories. This stand suits photographers and cinematographers who need reliable support for demanding shoots.

Thermals Noise and Power Draw

As a passive steel support stand, this product generates no heat, produces no audible noise, and draws no electrical power during operation. There are no fans, motors, or electronic components to create thermal load or acoustic disturbance. The silver finish resists wear without requiring active cooling or energy input. It operates silently and maintenance-free in any studio environment.

Maximum Height and Load Capacity

The stand extends to a maximum height of 13.3 feet and collapses to a minimum of 5.2 feet using four adjustable sections with column diameters of 30mm to 45mm. It safely supports equipment weighing between 31.1 and 40 lbs, with a rated capacity of 39.7 lbs (18kg). Buyers needing a taller reach or a higher load rating should consider alternative heavy-duty solutions.

How it compares

Measured against everything we stock in Photo Lighting & Studio Flashes, at today’s prices. Recalculated every night.

Price $184.99
Pricier than about 80% of the 3,696 comparable items (median $57.99).

Specifications

No published specifications for this item yet.

Questions about this item

How do I set up the leveling leg on the Flashpoint 13.3' Cine Stand Pro, and what is the common mistake?

Extend the leg until the built-in bubble level centres, then lock the collar. The step people miss is re-checking the level after mounting the load, because the weight shifts the balance.

Which parts of this stand will need maintenance or replacement over time?

The combo head's locking knobs and the four-section column clamps see the most wear. Keep threads clean and lightly lubricated; replace any clamp that no longer holds the 39.7 lb rating securely.

At what height does the stand become noticeably less stable under sustained use?

Stability drops sharply above 13.3 feet because the top 30 mm column section is the thinnest. Keep the centre column below full extension when supporting loads near 31.1 lb for long periods.

More in Photo Lighting & Studio Flashes

Similar items