Fluke 871207/1A 1A 600V 10kA Glass Fuse 5 Pack

Fluke 1 A 600 V glass fuse pack

This pack contains five Fluke BBS-series glass fuses rated at 1 ampere and 600 volts AC. They are designed as direct replacements for the internal protection circuits of Fluke digital multimeters and similar test equipment. The fast-acting element interrupts fault currents up to 10 kA, protecting the meter from damage during accidental overloads. Technicians and engineers who service or calibrate electrical instrumentation will find these fuses essential for maintaining safety compliance.

Drop-in cylindrical body installs in seconds

Each fuse measures 1-3/8 inches long by 13/32 inches in diameter, matching the standard cylindrical fuse holder found in most handheld multimeters. Installation requires only opening the meter's fuse compartment, removing the blown element, and inserting the new fuse with the correct orientation. The fiber body and single-element construction leave no ambiguity about polarity. The most common error is fitting a lower-voltage or lower-interrupting-rated fuse, which can fail explosively under fault conditions.

Five fuses cover multiple meter recalibrations

A single pack supplies enough spares for several service calls or a complete bench recalibration of multiple instruments. The 1 A rating suits the milliamp and microamp input circuits of typical Fluke meters, while the 10 kA interrupt rating at 600 V AC provides ample headroom for industrial power measurements. The fuses are not suitable for circuits requiring higher current ratings or for DC interrupting duties beyond the listed AC specification. Builders needing different amperage values must source the appropriate BBS-series variant separately.