Fluke TL81A Deluxe Test Lead Kit 2.6m 26mm jaw
Deluxe test lead kit with three colour-coded leads, matching alligator clips, 2.6 m length and 26 mm jaw opening for SMD and general electronics testing
- Complete test kit with three colour-coded leads and matching alligator clips
- 6 metre cable length gives generous reach across the workbench
- 26 mm jaw opening on clips grips a wide range of terminals
- Low-leakage probes ensure accurate high-resistance readings
- Designed as the direct replacement lead set for the 1550B MegaohmMeter
Test Lead Kit for Fluke 1550B MegaohmMeter
The Fluke TL81A Deluxe Test Lead Kit provides a complete replacement lead set designed specifically for the Fluke 1550B MegaohmMeter. It includes three colour-coded test leads in red, black and green fitted with low-leakage probes for reliable insulation resistance measurements.
2.6m Leads with 26mm Jaw Opening
Each lead measures 2.6 metres, giving ample reach for bench or field work while the alligator clips open to 26mm for secure attachment to large terminals or bus bars. The length suits most switchgear and motor testing scenarios, though very long cable runs or confined panels may require shorter leads.
Low-Leakage Probes and Colour-Coded Clips
Spring-loaded sharp tips on the probes maximise contact with small test points, reducing leakage current that can distort high-resistance readings. The matching red, black and green alligator clips and leads simplify phase identification and help prevent connection errors during repetitive tests.
How it compares
Measured against everything we stock in Multimeters & Electrical Testers, at today’s prices. Recalculated every night.
- Price $210.99
- Pricier than about 91% of the 971 comparable items (median $30.99).
Specifications
No published specifications for this item yet.
Questions about this item
Will the 2.6m leads reach test points on a Fluke 1550B MegaohmMeter without strain?
The 2.6m lead length provides ample reach for bench-top use with the 1550B MegaohmMeter, letting you position the meter and the device under test comfortably.
How can I confirm the low-leakage probes are making proper contact on SMD pads?
The spring-loaded sharp tips on the precision probes give tactile feedback when they seat on small SMD test points, and a stable resistance reading on the meter confirms good contact.
Does the kit include the micro-grabbers and mini alligator clips shown in the description, or must they be purchased separately?
The deluxe kit ships with micro-grabbers, mini alligator clips, standard alligator clips with 26mm jaw opening, and three colour-coded leads, so no extra accessories are required for typical SMD work.
More in Multimeters & Electrical Testers
Similar items
Matrix MPM-1010 Electrical System Tool 15-650Hz 0.3-3000W
- 12.5 L x17 W x8.3 H…
- 12.5 L x17 W x8.3 H…
BFKK 105PCS Multimeter Test Lead Kit with Hanging Loop Strap Magnetic Hanger
Power Circuit Probe Tester 9V-30V 0.3V-70V 10 functions
- 1 Piece
- Automotive Circuit…





