STARTECH PAC1011410 10 ft power extension cord 14 AWG
- Cable Connectors
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A sleeved power extension kit with 24-pin ATX, three 8-pin PCIe and two 8-pin EPS cables, each 300 mm long using 18 AWG wire and 5557-to-5559 connectors, supplied with a comb board for tidy routing
The FormulaMod Fm-NCK1 kit supplies one ATX 24Pin extension, three PCI-E 8[6+2]Pin extensions, two EPS 8[4+4]Pin extensions and a polypropylene cable comb board. Every cable uses 18 AWG conductors inside a 3 mm nylon braid with insulated middle layers. Connectors are male 5557 to female 5559 in a straight orientation. Length is 300 mm per cable.
Builders who need longer reach from a standard ATX power supply to motherboard, graphics card and CPU sockets will find the kit covers 24Pin, triple 8Pin GPU and dual 8Pin CPU requirements in one pack. The backward-compatible pin splits let unused halves tuck behind the tray. Buyers who want pre-bent connectors or lengths other than 300 mm should look at something else.
Each extension plugs between the existing modular cable and the component, so no PSU rewiring is required. The included comb board lets you align and separate individual wires for cleaner routing through grommets. The 3 mm diameter and flexible braid help cables follow tight bends behind the motherboard tray without adding bulk.
Measured against everything we stock in AC Extension Cords, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Straight |
Yes, the extensions plug into a standard ATX 24-pin motherboard connector, three PCI-E 8[6+2]-pin GPU connectors and two EPS 8[4+4]-pin CPU connectors on your existing PSU.
At 300 mm each cable adds 30 cm from the PSU socket, which is long enough for typical bottom-mount full-tower routing while leaving slack for the included comb board.
Verify the 24-pin, both 8-pin EPS and all three 8-pin PCI-E connectors click fully into their headers, then power on and check that the motherboard, CPU and GPU all initialise without POST errors.
More in AC Extension Cords
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?