We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow braided polyurethane air hose, 50 ft coil with 1/4 in fittings

Freeman

Freeman P1450RPU 50 ft 1/4 in Braided Polyurethane Air Hose

SKU CH-0SXD-77GET

A 50 ft braided polyurethane air hose rated for 300 PSI with field-repairable fittings and bend restrictors

  • Product typeStud Finders
  • Size or dimensionsAAA
  • Repair fittings on site to cut downtime
  • Bend restrictors stop kinks and twists
  • Withstands 300 PSI for demanding pneumatic tools
  • Stays flexible from -10 to 130 °F
  • Weighs only 2.1 lbs for easy handling

50 ft Braided Polyurethane Air Hose

The Freeman P1450RPU is a 50 ft by 1/4 in braided polyurethane air hose built for pneumatic tools on the job or around the house. It handles a maximum of 300 PSI and stays flexible from -10 to 130 degrees Fahrenheit. The hose weighs 2.1 lbs and includes field repairable end fittings to minimise downtime. Bend restrictors help inhibit kinking and twisting during use.

Check Compressor Output and Fitting Threads

Verify that your compressor does not exceed 300 PSI operating pressure before connecting this hose. Ensure your existing tools and couplers use 1/4 in. NPT threads for a proper seal. Confirm the temperature range of your work environment falls within the -10 to 130 degree Fahrenheit limits. The 50 ft length should suit the distance between your compressor and work area.

Field Repairable Fittings and Bend Restrictors

The 1/4 in. NPT end fittings are field repairable so a damaged section can be fixed on site without replacing the entire hose. Bend restrictors at each end reduce sharp bends that cause kinking and twisting during daily handling. Braided polyurethane construction resists abrasion while remaining pliable in cold conditions. Compatible 1/4 in. NPT fittings connect directly to most standard pneumatic tools.

How it compares

Measured against everything we stock in Utility & Specialty Hand Tools, at today’s prices. Recalculated every night.

Price $18.99
Cheaper than about 60% of the 2,474 comparable items (median $23.99).

Specifications

Product
Product typeStud Finders
Size & build
Size or dimensionsAAA

Questions about this item

Does the Freeman P1450RPU come with fittings or do I need to buy 1/4 in. NPT connectors separately?

The hose includes 1/4 in. NPT fittings on both ends, so no separate connectors are required for standard air-tool hookups.

Should I choose a different length or diameter for a small compressor, or is the 50 ft by 1/4 in. size suitable?

At 50 ft long with a 1/4 in. bore, this hose balances reach and flow for typical workshop compressors; shorter or larger-bore versions would be separate models.

Will the 300 PSI rating hold up when I run an impact wrench in freezing weather?

The braided polyurethane stays flexible down to -10 °F and is rated for 300 PSI maximum working pressure, so it handles cold-weather, high-demand tools without stiffening or bursting.

More in Utility & Specialty Hand Tools

Similar items