Fulham NPY-120-218-CFL CFL ballast rapid 120/230V 18W
A rapid-start electronic CFL ballast operating on 120/230V AC that drives two PL-type lamps up to 18W each and starts down to -14°F
- Product typeBallast
- Product weight0.46
- Rapid-start ballast ignites lamps quickly without flicker
- Dual 120/230V input suits multiple mains supplies
- Drives two 18W compact fluorescent lamps efficiently
- Operates down to -14°F for cold environments
- Lightweight 0.46 unit simplifies fixture installation
Fulham NPY-120-218-CFL Ballast
The Fulham NPY-120-218-CFL is an electronic CFL ballast with rapid start for PL-C, PL-L and PL-T lamps. It operates on 120/230V AC input and supports up to two bulbs at a maximum of 18W each. The unit weighs 0.46 lb and is supplied new.
Installers replacing failed ballasts in compatible
This ballast suits maintenance teams or electricians servicing existing luminaires that require a rapid-start, non-dimming ballast for 18W compact fluorescent lamps. Buyers needing dimming capability, support for higher-wattage lamps, or a different bulb type should look at alternative models.
Input voltage 120/230V AC
The ballast is designed for 120/230V AC supply, which determines whether it can be installed on the available circuit. Confirm the site voltage matches this range before purchase.
How it compares
Measured against everything we stock in DLP TV Lamps & Bulbs, at today’s prices. Recalculated every night.
- Price $16.99
- Cheaper than about 95% of the 8,306 comparable items (median $97.99).
Specifications
| Product | |
|---|---|
| Brand name | FULHAM |
| Product type | Ballast |
Questions about this item
How many 18 W PL-C lamps can the NPY-120-218-CFL ballast run at once?
The ballast supports two PL-C, PL-L or PL-T lamps with a maximum of 18 W each.
Does the ballast produce audible noise or significant heat during continuous operation?
It is an electronic rapid-start ballast with no fan; typical operation is silent and runs warm but not hot.
What mains voltage must the site provide for this ballast to work?
The unit accepts 120 V or 230 V AC input, so the installation must supply one of those voltages.
More in DLP TV Lamps & Bulbs
Similar items
Sony 3-875-777-02 Air Filter for VPL-HW10 HW15 HW20 HW30 HW40
- Project Lamp
Jaspertronics GY22 GX22 Ceramic Lamp Holder 10000W 500V 20A 15kV T350
- Project Lamp
Advanced Lamps 50V720-LAMP-A DLP Replacement Lamp
- Project Lamp





