We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black mini-tower with walnut front I/O panel, mesh front, front-mounted 850W PSU, three 120mm fans

GAMDIAS Technology

GAMDIAS Technology ATHENA M4M WOOD PC case 850W 80+ GOLD PSU 395mm GPU 360mm radiator support

SKU CH-SCHR-56EHK

A compact micro-tower case with a real walnut wood front I/O panel, an included 850W 80+ Gold PSU, three 120mm NOTUS M1 fans, support for GPUs up to 395mm and dual 360mm radiators.

  • Max graphics card length395 mm
  • Power supply850 W
  • Power supply mountingFront
  • Supported motherboard sizesMicro ATX
  • Dust filteringBottom
  • 3.5-inch internal bays1

Model ATHENA M4M WOOD + 850W Gold PSU

  • Real walnut front I/O panel adds natural warmth to the build
  • 850W 80+ Gold PSU included powers demanding components out of the box
  • Fits 395mm GPU and dual 360mm radiators for high-end cooling
  • Front-mounted PSU with downward ports simplifies cable routing
  • Three 120mm NOTUS M1 fans deliver 57.56 CFM airflow quietly

Compact Micro-Tower with Included PSU

The ATHENA M4M WOOD is a mini-tower chassis that ships with an 850W 80+ GOLD power supply pre-installed. It accepts Micro ATX motherboards and provides a distinctive real walnut wood front I/O panel. The design targets builders who want a compact system with high-end power delivery and a natural-material accent.

Thermals Noise and Power Draw

Three 120mm NOTUS M1 fans deliver up to 57.56 CFM of airflow through the perforated mesh front panel. An 8-port PWM ARGB hub is included for fan control and lighting synchronisation. The front-mounted PSU layout with downward-facing connectors and a shroud keeps cable routing tidy while maintaining clean internal airflow paths.

395mm GPU and Dual 360mm Radiator Support

Graphics cards up to 395 mm in length fit without modification, and the interior accommodates two 360 mm radiators simultaneously. CPU coolers up to 175 mm tall are supported, while the PSU bay accepts units up to 150 mm deep. The case does not suit builders who need ATX or E-ATX motherboard compatibility or more than one 3.5-inch drive bay.

How it compares

Measured against everything we stock in Tower & Desktop PC Cases, at today’s prices. Recalculated every night.

Price $167.99
Pricier than about 74% of the 1,468 comparable items (median $100.99).
Max graphics card length 395 mm
Typical for this category: the median of 894 items is 400 mm.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product typeATX Mini Tower
Product colorBlack
Storage
3.5-inch internal bays1
2.5-inch internal bays2
Ports & slots
Front panel portsUSB 3.0 / Audio
Power
Power supply includedYes
Power supply850 W
Size & build
Max graphics card length395 mm
Power supply mountingFront
Dust filteringBottom
Product dimensions446 × 235 × 347 mm
Compatibility
Supported motherboard sizesMicro ATX
CPU cooler height limit175 mm
PSU length limit150 mm

Other versions of this model

3 more in the same range

Questions about this item

How do I install the front-mounted 850W PSU, and what step do builders often miss?

Slide the PSU into the front chamber with its connectors facing downward, then route the included extension cable to the motherboard tray; the step most people forget is seating the PSU fully so the shroud aligns and the rear thumbscrews engage.

What maintenance will the three 120mm NOTUS M1 fans and bottom dust filter need later?

Remove the magnetic bottom filter every few months and rinse it; wipe the NOTUS M1 fan blades with a soft brush or compressed air to keep airflow near the rated 57.56 CFM.

What thermal limit appears first when a 395mm GPU and dual 360mm radiators run sustained loads?

The 175mm CPU-cooler clearance becomes the bottleneck — tall tower coolers cannot fit alongside a top 360mm radiator, forcing a switch to an AIO or low-profile air cooler.

More in Tower & Desktop PC Cases

Similar items