We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black mid-tower case with tempered glass side panel and claw-pattern mesh front

GAMEMAX Open box

GAMEMAX Leader 2 BK PC case

SKU CH-6E3G-N6H2J MPN Leader 2 BK

Mid-tower case fitting E-ATX boards, 425mm GPUs and 420mm radiators with four pre-installed 140mm ARGB PWM fans and USB Type-C Gen 2 front I/O

  • Max graphics card length425 mm GPU
  • Supported motherboard sizesE-ATX?ATX?M-ATX?ITX
  • Side panel type1 x Side Tempered Glass Panel
  • Dust filteringBottom / Top
  • 3.5-inch internal bays2
  • 2.5-inch internal bays3
  • Supports E-ATX boards and 425mm GPUs for versatile builds
  • 420mm radiator capacity and eight 140mm mounts enable high-performance cooling
  • Four pre-installed 140mm ARGB PWM fans with dedicated controller simplify airflow setup
  • Tool-free design, vertical GPU support and hidden cable routing speed up assembly
  • Type-C Gen 2 and dual USB 3.0 ports provide modern front-panel connectivity

Mid-tower case for high-end builds

The GAMEMAX Leader 2 BK is a black mid-tower chassis that accepts E-ATX, ATX, M-ATX and ITX motherboards. It comes with a tempered glass side panel, dust filters on the bottom and top, and space for two 3.5-inch drives plus three 2.5-inch drives. The open-box condition means the unit was previously unpacked but is fully functional.

GPU clearance of 425 mm

The single figure that decides fitment is the maximum graphics-card length of 425 mm. This allows virtually all current triple-slot cards to install without touching the front panel. Builders planning longer custom-loop reservoirs or unusually deep power supplies should verify their own measurements against the 245 mm PSU limit and 185 mm air-cooler height.

Four pre-installed 140 mm ARGB PWM fans

The case ships with three 140 mm fans at the front and one at the rear, all connected to an included ARGB PWM controller. Top mounts support up to 420 mm radiators, while the front and rear accept 120 mm, 140 mm, 240 mm, 280 mm and 360 mm units. Noise and thermals will depend on the fan curves you set and the components you install.

How it compares

Measured against everything we stock in Tower & Desktop PC Cases, at today’s prices. Recalculated every night.

Price $53.99
Cheaper than about 88% of the 1,468 comparable items (median $100.99).
Max graphics card length 425 mm GPU
Higher than about 81% of the 894 comparable items (median 400 mm).

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameGAMEMAX
Product lineMid Tower Gaming Case
LEADER 2 BK
Model nameLeader 2 BK
Product typeE-ATX
Product colorBlack
Storage
3.5-inch internal bays2
2.5-inch internal bays3
Size & build
Max graphics card length425 mm GPU
Side panel type1 x Side Tempered Glass Panel
Dust filteringBottom / Top
Fan mounting optionsFront - 3 × 140 mm / Rear - 1 × 140 mm / Top - 2 × 140 mm / Top - 3 × 120 mm
Product dimensions19.69 × 18.74 × 9.25 in
Product weight9.2kg
Shipping weight10.43 kg
Package size584 × 559 × 305 mm
Compatibility
Supported motherboard sizesE-ATX?ATX?M-ATX?ITX
Radiator supportFront - Up to 120 mm / Front - Up to 140 mm / Front - Up to 240 mm / Front - Up to 280 mm / Front - Up to 360 mm / Front - Up to 420 mm / Rear - Up to 120 mm / Rear - Up to 140 mm / Top - Up to 120 mm / Top - Up to 140 mm / Top - Up to 240 mm / Top - Up to 280 mm / Top - Up to 360 mm
PSU length limit245 mm PSU
More details
Included fansFront - 3 × 140 mm / Rear - 1 × 140 mm
Radiator installed420 mm radiators
120mm fan count9

Questions about this item

How does the 425mm GPU clearance translate when the front fans are installed?

The 425mm limit already accounts for the three pre-installed 140mm front fans, so any graphics card up to that length fits without removing them.

What front-panel USB standard does the Type-C port use and what throughput does it provide?

The front I/O includes a USB Type-C Gen 2 port alongside two USB 3.0 ports for high-speed peripheral connections.

Will a 420mm radiator fit in the front with the stock fans in place?

Yes, the front mount supports radiators up to 420mm and the pre-installed 140mm fans can be moved to the top or rear if needed.

More in Tower & Desktop PC Cases

Similar items