GCON DC/DC Boost Converter 12V to 48V 10A 480W gender changer
Boosts 12 V vehicle power to a fixed 48 V output at 10 A (480 W) with up to 95 % efficiency and full overload, over-temperature and short-circuit protection in a sealed aluminium housing
- Steps up 12V to 48V for 48V equipment
- Up to 95% efficiency reduces wasted energy
- Five protection circuits guard against faults
- Sealed aluminium housing resists water and dust
- Rated 10A continuous for 480W loads
12V to 48V Boost Converter for Vehicle Power
This DC/DC step-up module converts a 10V to 16V input into a fixed 48V output at up to 10A. It delivers 480W of continuous power for equipment that requires a higher voltage than a standard vehicle electrical system provides. The non-adjustable output suits installations with a defined voltage requirement.
Aluminium Sealed Housing for Harsh Environments
The aluminium shell with silicone sealing achieves waterproof, anti-shock, anti-humidity and dust-proof protection. This allows the unit to be mounted in exposed locations on trucks, taxis or mobile equipment without a separate enclosure. Thermal derating is required when ambient temperature exceeds 40 degrees.
Integrated Protection Suite Prevents Damage
Built-in over-load, over-current, over-temperature, short-circuit and over-voltage safeguards shut the converter down before connected devices are harmed. Conversion efficiency reaches 95 percent with a dynamic response speed of 200 microseconds. No accessories or configuration software are included in the package.
How it compares
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
- Price $83.99
- Pricier than about 90% of the 1,761 comparable items (median $18.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
At 480 W continuous load, which limit appears first — the 10 A current ceiling or the 40 °C thermal throttle point?
The converter is rated for 10 A continuous output; the supplier notes that when the case temperature exceeds 40 °C you should reduce power or improve cooling, so the thermal limit will be reached before the current limit if heat is not removed.
With the sealed aluminium enclosure and no fan, how hot and loud does the unit get during all-day operation at full load?
At up to 95 % efficiency the unit dissipates waste heat through the aluminium shell; it runs silently, but the case will become hot to the touch and the supplier advises extra cooling once the temperature passes 40 °C.
What power source must already be present to supply the 10 V–16 V DC input this converter requires?
A 12 V DC system such as a vehicle battery or a regulated 12 V supply capable of delivering roughly 40 A is needed to feed the converter’s input range.
More in Other Adapters & Couplers
Similar items
Cables To Go 03411 Two Port Keystone Single Gang Wall Plate White
- White
- With a wide selecti…
Innocard PCIe x8 Gen 4 ReDriver to SlimSAS 8i supports bifurcation gender changer
- PCIe Gen4
Monoprice Inc. 8729 S/PDIF Toslink gender changer White
- White





