GCON High Voltage Generator DC 6-12V to 500-1000kV Arc Pulse Module 5pcs
A five-piece set of high-voltage arc pulse generators that step up DC 6-12 V input to 500-1000 kV output for science experiments and electronic projects
- Delivers 500–1000 kV arc pulses from 6–12 V input
- Achieves high efficiency through Tesla-coil transformer design
- Includes 100 mm input and output cables for quick wiring
- Simple peripheral circuit connects directly to switch and battery
- Suits student experiments, electronic instruments and anion generators
High-Voltage Arc Generator Kit
This set contains five high-voltage generator modules that convert a DC 6V to 12V input into an output of about 500KV to 1000KV. Each module draws an input current of 2A to 5A and is suited for student science experiments, electronic instruments or small-scale anion generator projects.
Integration and Wiring Requirements
Every module ships with 100mm input and output cables; the red lead marks the positive connection. The peripheral circuit is simple, so the unit only needs a suitable battery or power supply and a switch to operate, freeing the builder from complex driver boards.
Sustained Discharge Behaviour
The modules use a high-voltage transformer and Tesla-coil principle to produce high-efficiency voltage pulses. Under continuous operation the discharge intensity remains strong, but the high output voltage demands careful insulation and safety clearance that are not covered by the kit itself.
How it compares
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
- Price $20.99
- Pricier than about 60% of the 1,761 comparable items (median $18.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How long can the module sustain 1000 kV output before the 5 A input limit trips?
The module draws 2 A to 5 A from a 6 V to 12 V supply; sustained arcs at the upper end of that current range will hit the supply limit first and shut down or sag voltage.
Does the 100 mm output cable stay cool during continuous arc operation?
The 100 mm high-voltage lead carries only brief high-frequency pulses, so it remains near ambient temperature, but the driver board and transformer warm noticeably after several minutes of non-stop firing.
What external power source and switch are needed to run one module?
A 6 V to 12 V battery or bench supply capable of 5 A, plus a simple toggle switch on the red-positive input lead, are all that is required to energise the module.
More in Other Adapters & Couplers
Similar items
HP HSTNN-LA40 45W AC Adapter Charger 845611-001 845836-850 854116-850 with Cord
Cables To Go 03411 Two Port Keystone Single Gang Wall Plate White
- White
- With a wide selecti…
Monoprice Inc. 8729 S/PDIF Toslink gender changer White
- White
Monoprice 6.00 ft HDMI to DVI Adapter Cable Black
- Single pack
- HDMI & DVI Cables





