We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
GE THQB 35 A single-pole bolt-on breaker, grey toggle, compact rectangular body

GE

GE THQB 35 A 1 Pole Bolt On Circuit Breaker 120/240V AC

SKU CH-Y8T7-AYG35

A 35 A single-pole bolt-on breaker rated for 120/240 V AC with a 10 kA interrupting capacity

  • Product typeCircuit Breakers
  • 35 A rating protects 120/240 V circuits
  • 10 kA interrupting capacity clears faults safely
  • Bolt-on mounting fits compatible load centres
  • Single-pole design suits standard lighting panels
  • UL Listed for code-compliant installations

Circuit Breaker for Lighting Panels and Load Centers

This GE THQB miniature circuit breaker provides 35 A overcurrent protection for single-phase 120/240 V AC circuits. It mounts by bolt-on connection in compatible GE lighting panels and load centers with a 100 A frame size.

Suited for Single-Phase Branch Circuits Requiring

Install this breaker when a 35 A single-pole device is specified for a lighting or appliance branch circuit. It is not suitable for circuits requiring two-pole or three-pole protection, DC voltage applications, or higher interrupting ratings beyond 10 kA at 120/240 V AC.

10 kA Interrupting Rating at 120/240 V AC

The breaker carries a maximum AIR rating of 10 kA at the rated voltage, which determines whether it meets the available fault current at the installation point. Verify the panel’s short-circuit current rating before selection.

How it compares

Measured against everything we stock in Breakers & Circuit Protection, at today’s prices. Recalculated every night.

Price $46.99
Cheaper than about 58% of the 1,135 comparable items (median $54.99).

Specifications

Product
Brand nameGE
Product typeCircuit Breakers

Questions about this item

What panel space does the 1.0 in width breaker require for bolt-on mounting?

The single-pole unit measures 1.0 in wide, 3.53 in long and 3.28 in deep, so reserve that exact slot in a compatible load center or lighting panel.

Which torque value should I apply when securing the bolt-on lugs to avoid a loose connection?

Insert the breaker onto the panel bus, tighten the mounting bolts to the manufacturer-specified torque for the frame, then torque the terminal lugs within the 14 MCM Cu to 8 MCM wire range.

When should the 35 A device be replaced after a fault event?

Replace the breaker if it has interrupted a short-circuit at or near its 10 kA AIR rating, shows contact discoloration, or fails to hold the 35 A load without nuisance tripping.

More in Breakers & Circuit Protection

Similar items