ASUS ROG MAXIMUS Z890 APEX Intel motherboard
- Core Ultra Processo…
- Intel Z890
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Micro-ATX board with LGA 1151 socket, Intel B250 chipset, four DDR4 slots up to 64 GB, one PCIe 3.0 x16 slot, six SATA ports and an M.2 connector
The Gigabyte GA-B250M-D3H revision 1.0 is a micro ATX motherboard built on the Intel B250 chipset. It accepts LGA 1151 processors from the Core i7, i5, i3, Pentium and Celeron families. The board provides four 288-pin DDR4 slots, a single PCI Express 3.0 x16 slot, six SATA 6Gb/s ports, one SATA Express connector and one M.2 socket.
This board suits builders using 6th or 7th generation Intel CPUs who need a compact platform with dual-channel memory up to 64 GB. It is not compatible with 8th generation processors, so owners of those chips must choose a different platform. The single full-length PCIe slot limits multi-GPU configurations.
The memory standard lists DDR4 2400 and 2133 MHz, but 2400 MHz or XMP operation only activates when a 7th generation processor is installed. With a 6th generation CPU the board runs memory at 2133 MHz. This distinction decides whether the board meets your speed target.
Measured against everything we stock in Motherboards for Intel CPUs, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | GIGABYTE |
| Model name | GA-B250M-D3H (rev. 1.0) |
| Processor | |
| Processor | Core i7 / i5 / i3 / Pentium / Celeron (LGA1151) |
| CPU socket | LGA 1151 |
| Chipset | Intel B250 |
| CPU technologies | * Not Compatible with Intel 8th Gen CPUs |
| Memory | |
| Memory slot count | 4 × 288pin (DDR4) |
| Supported memory | DDR4 2400*/ 2133 MHz/* To support 2400 MHz or XMP memory, you must install a 7th generation processor. |
| Max supported RAM | 64 GB |
| Memory channels | Dual Channel |
| Storage | |
| SATA ports | 6 x SATA 6Gb/s connectors/* Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA connectors. |
| M.2 slots | 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe x4/x2 SSD support) |
| Audio & video | |
| Audio chip | Realtek ALC892 |
| Sound channels | 2/4/5.1/7.1-channel |
| Connectivity | |
| Ethernet controller | Intel GbE LAN chip |
| Maximum network speed | 1 Gbit/s |
| Ports & slots | |
| PCIe 3.0 x16 slots | 1 x PCI Express x16 slot, running at x16 (PCIEX16)/* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot./1 x PCI Express x16 slot, running at x4 (PCIEX4)/(All of the PCI Express slots conform to PCI Express 3.0 standard.) |
| PCI slots | 2 x PCI Slots |
| PS/2 ports | 1 x PS/2 keyboard/mouse port |
| Video connectors | 1 x D-Sub port/1 x DVI-D port |
| HDMI ports | 1 x HDMI |
| Ethernet port | 1 x RJ45 |
| DisplayPort connectors | 1 x DisplayPort |
| USB 3.1 ports | 4 x USB 3.1 Gen 1 ports |
| USB 2.0 ports | 2 x USB 2.0 |
| Audio jacks | 6 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker Out, Line In, Line Out, Mic In) |
| Onboard USB headers | 1 x USB 3.1 Gen 1 header/2 x USB 2.0/1.1 header |
| Power | |
| Power connectors | 24 Pin |
| Size & build | |
| Form factor | Micro ATX |
| More details | |
| SATA express | 1 x SATA Express connector/* The SATA Express connector is not compatible with regular SATA devices. |
The board uses the Micro-ATX form factor, so any chassis that accepts Micro-ATX or larger will fit; the four 288-pin DDR4 slots sit along the right edge and need standard DIMM height clearance.
The PCIEX16 slot runs at x16 electrically; the manual stresses inserting the card there first for best performance, yet many install it in the second x16-size slot that only runs at x4.
Both controllers are soldered onboard and need no user service; just clear dust from the rear I/O ports and the board surface periodically so heat can dissipate normally.
More in Motherboards for Intel CPUs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?