GLOTRENDS LE8202 2-Port Gigabit PCIe 1.0 x1 Network Card
Adds two Gigabit RJ45 ports through a single PCIe 1.0 x1 slot using dual RTL8111H chips
Ports 2-port, 1Gbps
- 2-port, 1Gbps$17.99
- 2-port(1Gbps) + 2-port(2.5Gbps)$32.99
- 4-port, 2.5Gbps$43.99
- Dual Gigabit ports run at full speed simultaneously
- Single PCIe 1.0 x1 slot adds two RJ-45 connections
- Realtek RTL8111H chipset enables 1000 Mbps on each port
- Works with Windows, Linux, macOS and major router/firewall OSes
- LED shows green for 1000 Mbps, yellow for 100 Mbps
Dual-Port Gigabit Adapter for Servers and Firewalls
The GLOTRENDS LE8202 adds two RJ45 Ethernet ports through a single PCIe 1.0 x1 slot. It targets builders who need extra wired links for NAS boxes, soft routers or virtualised firewall appliances.
Realtek RTL8111H Chipset with Link LEDs
Dual RTL8111H controllers share the 2.5 Gbps upstream bandwidth so both ports can run at 1000 Mbps simultaneously. Yellow and green LEDs show 100 Mbps or 1000 Mbps link status at a glance.
Passive Cooling and Low-Profile Fit
The card draws minimal power and runs silently without a fan. Auto-negotiation handles crossover correction and pair-swap detection. Wake-on-LAN and checksum offload reduce host CPU load during idle periods.
How it compares
Measured against everything we stock in Ethernet Cards & NICs, at today’s prices. Recalculated every night.
- Price $17.99
- Cheaper than about 93% of the 1,505 comparable items (median $90.99).
Specifications
No published specifications for this item yet.
Other versions of this model
2 more in the same range
Questions about this item
What bandwidth does the PCIe 1.0 x1 interface provide for the LE8202?
The PCIe 1.0 x1 slot delivers 2.5 Gbps upstream bandwidth, allowing both RJ45 ports to run at 1000 Mbps simultaneously without needing a larger x16 slot.
What physical slot and clearance does the LE8202 require?
It installs in any standard PCI Express x1 slot; the low-profile bracket fits slim chassis and only one x1 slot is consumed.
How is the LE8202 installed and what step do users often miss?
Insert the card into a free PCIe x1 slot, secure the bracket screw, connect Ethernet cables, then install the Realtek RTL8111H driver from the Realtek site if the OS does not detect the adapter automatically.
More in Ethernet Cards & NICs
Similar items
Intel EXPI9301CTBLK network card 10/100/1000Mbps PCI-Express
- 10/100/1000 Mbit/s
- PCIe
TP-Link TX401 10Gbps PCIe 3.0 x4 network card
- 10 Gbit/s
- PCIe 3.0 x4
Intel I350T4V2BLK network card 4 x RJ45 PCIe 2.1 x4
- 10/100/1000 Mbit/s
- EEE 802.3 (10BASE-T…
STARTECH USB32000SPT USB 3.0 Dual Gigabit Ethernet Adapter network card
- 10/100/1000 Mbit/s
- USB







