Glow Edge Inner and Outer Diffusion Fabrics for EZ Lock 34.0" Deep Quick Softbox
Inner and outer diffusion fabrics fit the 34" EZ Lock deep parabolic softbox for three levels of softness
- Product typeLighting
- Inner diffuser eliminates hotspots with central panel
- Double diffusion creates three distinct contrast levels
- Self-Securing Closure attaches fabrics around entire rim
- Lightweight scrim folds flat for simple transport
- Designed for EZ Lock 34.0" Deep Parabolic Quick Softbox
Diffusion Set for EZ Lock 34" Softbox
This fabric kit adds inner and outer diffusion layers to the EZ Lock Deep Parabolic Quick 34" Softbox. It gives photographers three distinct contrast and sharpness levels from a single modifier. The inner panel includes a circular centre section to prevent hotspots. Both pieces fold flat for lightweight transport.
Suited for studio and location shooters wanting
The set works only with the matching 34" EZ Lock Deep Parabolic Quick Softbox, so owners of other modifiers cannot use it. Photographers who need harder, more directional output or a bare parabolic look should keep the fabrics off. It does not fit smaller or larger softboxes.
Slips onto the softbox rim and rod spokes
The outer fabric wraps the rim with a self-securing closure while the inner fabric snaps onto elastic tabs on each spoke. No extra hardware, rods or adapters are required. Used together they create double diffusion for the softest output; used singly they give intermediate contrast. The kit stores flat alongside the collapsed softbox.
How it compares
Measured against everything we stock in Photo Lighting & Studio Flashes, at today’s prices. Recalculated every night.
- Price $15.99
- Cheaper than about 93% of the 3,696 comparable items (median $57.99).
Specifications
| Product | |
|---|---|
| Product type | Lighting |
Questions about this item
Which softbox model must I already own for these diffusion fabrics to fit?
The inner and outer fabrics are made for the EZ Lock Deep Parabolic Quick 34" Softbox and attach to its rim and rod spokes.
Can I still use the softbox with its standard reflector when the fabrics are installed?
The fabrics slip over the softbox front and secure with a Self-Securing Closure; the reflector remains inside and the softbox still blends with daylight or fill lights.
How do I confirm the three diffusion levels are working after setup?
Snap the inner fabric to the elastic tabs on each rod spoke, add the outer fabric, and you will see progressively softer light with reduced hotspots and lower contrast.
More in Photo Lighting & Studio Flashes
Similar items
selfila 5.12 in USB Ring Light 3200K-6500K 48 LED Black
- Ring Lights
- Ring light and Cont…
Neewer S2-VCL 6" USB Ring Light, 48 LED, 10 Brightness, 3 Modes
- S2-VCL
- S2-VCL, 1 year manu…





