GODIAG GT114 Audi K-Line IMMO Cable for A4 A6 C5 2nd 3rd Gen
Enables offline IMMO synchronization, key matching, data read-write and mileage repair on Audi A4 and A6 C5 dashboards from 2000 to 2006
- Key featuresGODIAG GT114 Audi K-Lline IMMO cable performs offline key an
- Performs offline key and IMMO instrument synchronization test
- Enables intelligent IMMO emergency start area sensing detection
- Supports IMMO dashboard offline diagnosis and data reading
- Works with VCDS 5053, VAS5054A and X300 DP Plus
- Includes independent power and ignition switches for control
Target Vehicles and Core Function
The GODIAG GT114 cable connects Audi A4 and A6 C5 models from 2000 to 2006 to diagnostic tools for immobiliser work. It converts the dashboard connection to standard OBD2 so technicians can read and write instrument IMMO data, repair mileage and match keys offline.
Sustained Diagnostic Use
An independent power switch and separate ignition switch let the operator control voltage during long coding sessions without draining the vehicle battery. The key induction adapter includes a light to confirm coil activity while the tool maintains a stable K-Line link through extended data transfers.
Installation Notes
The package plugs into the dashboard harness and the tester with no soldering required. Successful key matching demands a genuine Megamos ID 48 key because the Xhorse super chip will not complete the process. After reading data the PIN code must be recorded and the generated IMMO file written back before learning can finish.
How it compares
Measured against everything we stock in Multimeters & Electrical Testers, at today’s prices. Recalculated every night.
- Price $31.99
- Typical for this category: the median of 971 items is $30.99.
Specifications
| Product | |
|---|---|
| Brand name | GODIAG |
Questions about this item
Does the GT114 cable draw power from the car or need its own supply while running key-matching tests all day?
The cable has an independent power switch and an independent ignition switch, so it uses vehicle power but gives you manual control over when the dashboard and immobiliser circuits are energised.
Which diagnostic tools must I already own to use the GT114 for offline IMMO data reading and key synchronisation?
It works with HEX V2, VAGCOM VCDS 5053, VAS5054A, VAS6154, SUPER VAG K+CAN, Obdstar, Lonsdor, AVDI, ZEDFULL, VVDI2, Key Tool Plus, X300 DP Plus, SUPER VAG and AUTEL devices.
Can I keep using my existing Megamos ID 48 transponder keys when the GT114 writes new immobiliser data to the dashboard?
Yes — the matching process requires a Megamos ID 48 key, and after the instrument data is written back you perform the normal matching learning with those same keys.
More in Multimeters & Electrical Testers
Similar items
allsun EM287 Electrical System Tool 2-24V 5m Cable
- Em287, Battery Powe…
- 10.79 L x2.09 W x1.…
Car Battery Automotive Battery Load Checker 12V 100A 6V 50A
- 1 Piece
- No, Battery Powered
Power Circuit Probe Tester 9V-30V 0.3V-70V 10 functions
- 1 Piece
- Automotive Circuit…





