Seagate BarraCuda ST8000DM004 8TB 5400 RPM 256MB SATA 3.5" internal hard drive
- 8 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1 TB 3.5" desktop hard drive with 7200 RPM speed and 32 MB cache on a SATA 3.0 Gb/s interface
The GoHardDrive WL is a 3.5 inch internal hard drive built for desktop PCs, NAS enclosures and CCTV DVR systems. It connects through a SATA 3.0Gb/s interface and spins at 7200 RPM with a 32MB cache buffer. The bare-drive packaging suits system integrators and DIY builders who need bulk storage without retail accessories.
One thousand gigabytes of space holds operating systems, media libraries and continuous surveillance footage with room to spare. The 7200 RPM spindle speed keeps sequential transfers responsive for daily computing and multi-stream recording. The SATA 3.0Gb/s link caps peak throughput, so sustained writes on large arrays will hit the interface ceiling before the platters do.
A standard 3.5 inch form factor fits any desktop drive bay or hot-swap tray that accepts SATA power and data cables. No extra controllers or adapters are required beyond a free SATA port on the motherboard or RAID card. The drive leaves M.2 slots and PCIe lanes open for faster boot devices while providing economical bulk capacity.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Total capacity | 1 TB |
| Recommended use | For Daily Computing |
| Performance | |
| Rotational speed | 7,200 RPM |
| Storage | |
| Cache memory | 32 MB |
| Ports & slots | |
| Interface type | SATA 3.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
Yes, the drive is backward compatible with SATA 1.5Gb/s controllers and will operate at the slower link speed.
Run the manufacturer's Data Lifeguard diagnostic tool; it verifies SMART health, read/write speed and bad sectors.
No, bare drive packaging means only the drive is supplied; SATA data and power cables must be purchased separately.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?