Goldwood Sound GW-206/4 6.5" PA speaker 180W 4ohm
A 6.5" PA woofer handling 90 W RMS with 88 dB sensitivity and a 56–8000 Hz range, built with a 20 oz magnet, 1.5" aluminum voice coil and poly-laminated cone for live sound, DJ.
- Product typeSpeaker
- Handles 90W RMS for clean output
- 180W max power for dynamic peaks
- 56–8000Hz range covers vocals and instruments
- 88dB sensitivity yields loud sound efficiently
- 4ohm impedance suits pro PA amplifiers
Speaker type and intended use
The Goldwood Sound GW-206/4 is a 6.5-inch PA woofer rated at 90 watts RMS and 180 watts maximum power with a 4 ohm impedance. It is built for pro DJ, PA, karaoke, live sound, fixed installation, studio monitor and home audio applications.
Installation fit and common issues
The driver requires a 5.71-inch enclosure cut-out and 3.01 inches of mounting depth behind the baffle. Installers must verify these dimensions before cutting; a hole that is too large or insufficient depth will prevent a secure seal and degrade low-frequency output.
Sustained-load behaviour
With a 20oz magnet, 1.5-inch aluminum voice coil and vented pole piece, the woofer maintains its 88 dB sensitivity across the 56 to 8000 Hz range during extended use. The poly-laminated cone and rolled foam surround resist thermal compression so output stays consistent through long sets.
How it compares
Measured against everything we stock in PA Systems & Powered Speakers, at today’s prices. Recalculated every night.
- Price $21.99
- Cheaper than about 82% of the 224 comparable items (median $67.99).
Specifications
| Product | |
|---|---|
| Brand name | Goldwood |
| Product type | Speaker |
Questions about this item
How can I verify the GW-206/4 is performing correctly after installation?
Play audio through the speaker and listen for clear output across the 56 to 8000 Hz range with no distortion at normal volumes; the 88 dB SPL rating and 90 W RMS handling indicate it should reach loud levels cleanly when driven by a suitable amplifier.
What comes with the GW-206/4 and what must I provide separately?
The box contains one Goldwood GW-206/4 6.5" woofer with a 20 oz magnet, 1.5" aluminum voice coil, poly-laminated cone, rolled foam surround and stamped steel frame; you must supply an enclosure with a 5.71" cutout, 3.01" mounting depth, wiring and an amplifier capable of 4 ohm loads.
Which version of the GW-206/4 should I choose for my PA system?
This model is a single 4 ohm variant rated at 90 W RMS and 180 W max; select it when your amplifier delivers up to 180 W into 4 ohms per channel — if your amp requires 8 ohms or a different power rating, choose a matching speaker instead.
More in PA Systems & Powered Speakers
Similar items
Goldwood Sound GW-S650/4 6.5" Woofer 170W 4ohm PA Speaker
- Speaker





