We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray metal airless spray tip, .019 in orifice, reversible design

Graco

Graco XHD419 Airless Spray Tip .019 in

SKU CH-S3WP-8Z9SF

A .019 in reversible airless spray tip rated to 7,250 psi for 8–10 in patterns and compatible with multiple Graco XHD spray gun models

  • Product colorGray
  • .019 in tip delivers fine 8–10 in spray pattern
  • 7 250 psi rating handles high-pressure coatings
  • Reversible design clears clogs without tools
  • Fits XHD 419 and 287988 Graco spray guns
  • Gray finish identifies tip size at a glance

Graco XHD419 .019 in tip

The Graco XHD419 is a new airless spray gun tip with a .019 in orifice and a reversible design. It produces a pattern size of 8 in to 10 in and fits a 7/8 in thread. The tip is rated for a maximum working pressure of 7,250 psi and is coloured gray.

Capacity and headroom

This tip handles light coatings at 7,250 psi and delivers an 8 in to 10 in fan. It is compatible with Graco models X30DH4, X40DH4, X45DH4, X46DH4, X50DH4, X55DH4, X60DH4, X70DH4 and X80DH4. It does not suit larger orifice sizes or higher pressure ratings beyond the stated maximum.

Thermals noise and power

The tip is a passive component with no moving parts, so it generates no noise or heat of its own. Power draw is determined entirely by the connected spray pump. Normal use adds no thermal load or acoustic signature beyond the pump itself.

How it compares

Measured against everything we stock in Painting Tools & Sprayers, at today’s prices. Recalculated every night.

Price $83.99
Pricier than about 86% of the 640 comparable items (median $9.99).

Specifications

Product
Brand nameGRACO
Product colorGray

Questions about this item

Will the .019 in tip fit my existing Graco XHD guard and housing?

The tip threads are 7/8 in and the supplier lists it for use with part 287988, so it matches the standard Graco XHD guard and housing.

How can I verify the XHD419 is spraying correctly after I install it?

At up to 7250 psi the tip should produce a consistent 8 in to 10 in fan with clean edges; if the pattern narrows or shows tails, increase pressure or clean the reversible seat.

Does the XHD419 package include a guard, housing or seal, or must I order them separately?

The supplier notes "Includes Not Applicable", meaning only the tip itself is supplied; guard, housing and any seals are sold separately.

More in Painting Tools & Sprayers

Similar items