We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Guardian 00373 D-Bolt Anchor Connector, 3 in ring, galvanized and stainless steel

Guardian

Guardian 00373 D-Bolt Anchor Connector 3 in traffic safety equipment

SKU CH-FHKG-4TEMX

A D-bolt anchor connector with a 3 in. ring, 4 in. length, 5,000 lb tensile strength and 420 lb weight capacity meeting ANSI Z 359.1 -07, ANSI A 10.32 -12, OSHA 1910 and OSHA 1926 Subpart M standards

  • Main materialHAWA
  • Galvanized and stainless steel construction resists corrosion
  • Meets ANSI Z 359.1 -07 and ANSI A 10.32 -12 standards
  • Rated for 5,000 lb tensile strength and 420 lb weight capacity
  • Complies with OSHA 1910 and OSHA 1926 Subpart M regulations

Guardian 00373 D-Bolt Anchor Connector

The Guardian 00373 D-Bolt Anchor Connector is a fall-protection anchorage connector designed for workers who need a secure tie-off point on structural steel or concrete. Its three-inch ring diameter and four-inch length meet ANSI Z 359.1 -07, ANSI A 10.32 -12, OSHA 1910 and OSHA 1926 Subpart M requirements for personal fall-arrest systems.

Replaces worn or non-compliant anchors

This connector replaces anchors that no longer meet the 5,000 lb tensile-strength requirement or the 420 lb weight-capacity limit set by current standards. The jump is worth it when an inspection reveals corrosion, deformation or missing certification markings on the existing hardware.

How it compares

Measured against everything we stock in Traffic Cones, Signs & Safety Gear, at today’s prices. Recalculated every night.

Price $45.99
Cheaper than about 58% of the 1,503 comparable items (median $61.99).

Specifications

Product
Brand nameGUARDIAN
Size & build
Main materialHAWA

Questions about this item

What diameter hole does the 3 in ring on the Guardian 00373 D-Bolt Anchor Connector require for mounting?

The connector has a 3 in ring diameter and a 4 in overall width; drill a hole that accommodates the 3 in ring and allows the 4 in body to seat flush.

How do you install the Guardian 00373 D-Bolt Anchor Connector, and what step is commonly missed?

Insert the D-bolt through the prepared opening, tighten to the specified torque, then verify the ring sits fully seated; the step often missed is confirming full ring contact before applying any load.

More in Traffic Cones, Signs & Safety Gear

Similar items