We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with gold edge connector and black controller chip, 22 by 80 millimetres, no heatsink

GUDGA

GUDGA GXF-S-1TB-2280-PRO 1TB internal SSD

SKU CH-QGK9-3GF8X

A 1TB internal SSD with 7200MB/s read and 6500MB/s write speeds using 3D TLC NAND and a PCIe 4.0 x4 NVME interface

  • Total capacity1 TB
  • Sequential read speed7,200 MB/s
  • Sequential write speed6,500 MB/s
  • Interface typePCI-Express 4.0 x4
  • Product typeInternal Solid State Drive (SSD)
  • Intended useConsumer
  • Fast game loads from 7200MB/s read speed
  • Quick file saves with 6500MB/s write speed
  • Reliable storage using 3D TLC NAND
  • High bandwidth via PCIe 4.0 x4
  • Large 1TB capacity for games and apps

PCIe 4.0 x4 NVME SSD

The GUDGA GXF-S-1TB-2280-PRO is a 1TB internal solid state drive built on 3D TLC NAND. It connects through a PCIe 4.0 x4 interface using the NVME 1.4 protocol and a 75-pin M.2 2280 connector. Sequential reads reach 7200MB/s and writes reach 6500MB/s.

Who this suits

This drive fits desktops, laptops and PS5 consoles that accept a single-sided M.2 2280 module without a heatsink. The 2.20mm height clears tight slots. Buyers needing a factory-fitted heatsink or a drive rated for sustained write workloads beyond 600TBW should look at other models.

Deciding specification

The PCIe 4.0 x4 NVME interface delivers 7200MB/s read and 6500MB/s write throughput. If the host platform only supports PCIe 3.0 the drive will still work but cannot reach these speeds.

How it compares

Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.

Price $90.99
Cheaper than about 75% of the 1,994 comparable items (median $180.49).
Total capacity 1 TB
Typical for this category: the median of 1,368 items is 1 TB.
Sequential read speed 7,200 MB/s
Higher than about 83% of the 1,180 comparable items (median 2,400 MB/s).
Price per TB $90.99 per TB
Cheaper than about 89% of the 1,362 comparable items (median $165.50 per TB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameGUDGA
Product lineGXF-S-2280-PRO
Model nameGXF-S-1 TB-2280-PRO
Total capacity1 TB
Product typeInternal Solid State Drive (SSD)
Intended useConsumer
Performance
Sequential read speed7,200 MB/s
Sequential write speed6,500 MB/s
Storage
NAND flash type3D TLC
Write endurance600 TB
Connectivity
Connection protocolNVMe 1.4
Ports & slots
Interface typePCI-Express 4.0 x4
Connection75 Pins
Size & build
Heat sinkWithout HeatSink
Overall height2.2 mm
Overall width22 mm
Product depth80 mm
Product weight26g
Environment & compliance
Operating temperature range0 °C to 70 °C
Storage temperature range-20 °C to 85 °C
Manufacturer recertifiedYes
More details
Seek time0.1 ms
Mean time between failures2,000,000 h
Ready boostYes

Questions about this item

Does my motherboard need a PCIe 4.0 x4 M.2 slot to use the GUDGA GXF-S-1TB-2280-PRO?

Yes, the drive connects through a 75-pin M.2 2280 slot wired for PCIe 4.0 x4 and NVMe 1.4; an older PCIe 3.0 slot will work but caps the 7200MB/s read and 6500MB/s write speeds.

Will the GUDGA GXF-S-1TB-2280-PRO run alongside my existing PCIe 3.0 NVMe drive without slowing it down?

Each drive negotiates its own link, so the GUDGA GXF-S-1TB-2280-PRO will operate at PCIe 4.0 x4 while your older drive stays at PCIe 3.0 x4; neither forces the other to drop lanes.

How can I confirm the GUDGA GXF-S-1TB-2280-PRO is delivering its rated 7200MB/s read and 6500MB/s write after installation?

Run a sequential benchmark such as CrystalDiskMark on an empty partition; sustained reads near 7200MB/s and writes near 6500MB/s with the drive temperature staying below 70°C confirm it is working as intended.

More in Internal NVMe & SATA SSDs

Similar items