We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Harris Safety-Silv-45 brazing alloy coil with flux paste jar

Harris

Harris Safety-Silv-45 Brazing Kit 1225-1370 °F 1.75 oz Flux

SKU CH-7FTX-CEEE1

High-silver brazing alloy melts at 1225–1370 °F and includes 1.75 oz flux paste

  • Main materialSafety-Silv-45
  • Product typeWelding Supplies
  • 45 % silver alloy creates strong, ductile joints
  • Melts between 1225 °F and 1370 °F for controlled flow
  • 75 oz flux paste cleans surfaces and promotes wetting
  • Meets AWS A5.8 BAg-5 classification for consistent quality
  • 1/16 in coil form allows precise, waste-free application

Brazing Kit for High-Silver Alloy Work

The Harris Safety-Silv-45 kit supplies a 45 percent silver brazing alloy classified as BAg-5 for joining ferrous and non-ferrous metals. It includes a one-ounce coil of 1/16 inch diameter wire and a 1.75 ounce jar of paste flux. The kit suits maintenance technicians and fabricators who need a high-silver filler for strong, ductile joints.

Thermal Range and Flux Performance

The alloy melts between 1225 and 1370 degrees Fahrenheit with a solidus of 1225 and liquidus of 1370 degrees Fahrenheit. A fluidity rating of 6.5 indicates good capillary flow into tight joint clearances. The supplied paste flux protects the braze area from oxidation during the heating cycle.

Deciding Specification — Silver Content

The 45 percent silver content and the 1225 to 1370 degrees Fahrenheit working range determine suitability for the application. Lower-silver alloys melt at higher temperatures and may not provide the same ductility or corrosion resistance. Buyers needing a lower melting point or different alloy classification should select an alternative filler metal.

How it compares

Measured against everything we stock in Welding Equipment & Positioners, at today’s prices. Recalculated every night.

Price $48.99
Typical for this category: the median of 1,978 items is $50.99.

Specifications

Product
Brand nameHarris
Product typeWelding Supplies
Size & build
Main materialSafety-Silv-45

Questions about this item

How do I install the Safety-Silv-45 alloy coil and flux, and what step is most often missed?

Clean the joint until bright metal shows, apply the 1.75 oz flux paste evenly, then feed the 1/16 in alloy coil into the joint while heating to the 1225–1370 °F range; the step most often missed is pre-cleaning, which prevents the flux from wetting properly.

What maintenance or replacement will the brazing kit need later?

The 1 oz Safety-Silv-45 coil and 1.75 oz flux jar are consumables; replace them when the alloy runs out or the flux paste dries and can no longer protect the joint at 1225–1370 °F.

What limit appears first during sustained brazing with this alloy?

The fluidity rating of 6.5 means the molten alloy’s flow degrades first if the temperature drifts above the 1370 °F liquidus, causing sluggish fill and poor capillary action.

More in Welding Equipment & Positioners

Similar items