Helly Hansen 70317 590 Navy Rain Jacket with Hood L
A navy polyester rain jacket with attached hood and zippered storm flap, hip length and sized for a 42 1/2 inch chest
- Waterproof protection with polyester/polyurethane shell
- Adjustable coverage via attached hood design
- Wind-blocking front zipper with storm flap
- Hip-length cut measuring 32 1/4 inches
- Chest fit up to 42 1/2 inches maximum
Navy rain jacket for outdoor work
The Helly Hansen 70317 590 jacket is a men's hip-length shell in size L with an attached hood and a zipper front covered by a storm flap. It is built from a polyester and polyurethane blend and carries no high-visibility rating or ANSI classification. The garment is uninsulated and has no removable liner, so it serves as a lightweight barrier against rain.
42 1/2 in chest and 32 1/4 in length
The cut fits a maximum chest of 42 1/2 in and falls to the hip at 32 1/4 in, giving room for a mid-layer underneath while keeping the hem clear of a tool belt. There are no inside or outside pockets, so the wearer must carry essentials elsewhere. The lack of insulation means the jacket stops being comfortable once temperatures drop toward freezing.
Polyester polyurethane shell with storm-flap zipper
The fabric combines polyester and polyurethane to shed water while remaining pliable enough for movement. The attached hood stays in place without separate fasteners, and the storm flap behind the zipper blocks wind-driven rain at the front closure. No lining is removable, so cleaning follows a single set of care instructions for the whole garment.
How it compares
Measured against everything we stock in Face Masks, Respirators & PPE, at today’s prices. Recalculated every night.
- Price $59.99
- Pricier than about 76% of the 5,612 comparable items (median $24.99).
Specifications
| Product | |
|---|---|
| Brand name | HELLY HANSEN |
Questions about this item
Will the 32 1/4 in hip-length cut sit over a standard work shirt without pulling tight across the 42 1/2 in chest?
The jacket is cut to a 32 1/4 in hip length with a maximum chest of 42 1/2 in, so it layers over a typical work shirt while still allowing the zipper and storm flap to close fully.
How can I confirm the attached hood and storm-flap zipper are sealing correctly the first time I wear it in rain?
Zip the front completely, snap the storm flap down, then pull the attached hood forward; water should bead and run off the polyester/polyurethane shell without leaking through the closure or hood seams.
Does the 70317 590 navy jacket include any inner liner, removable insulation or pocket accessories in the box?
The jacket ships with its fixed polyester/polyurethane lining already sewn in; there is no removable liner, no insulation layer and no extra pocket accessories included.
More in Face Masks, Respirators & PPE
Similar items
Moldex 2840R95 R95 Disposable Respirator with Valve M/L Gray PK10
- Respiratory Protect…





