HITACHI CP-X2011N-LAMP DLP Replacement Lamp 210W
210 W DLP replacement lamp and housing module for Hitachi CP-X2011N projectors with original-specification UHP bulb
- Product typeProject Lamp
- Product weight0.999
- Ready-to-install module with original-spec UHP lamp inside
- 210 W AC power rating matches projector requirements
- 140 W secondary rating supports consistent brightness
- Pre-assembled housing eliminates alignment hassle
- Weighs .9990 kg for secure, stable mounting
Exact Fit for Hitachi CP-X2011N
This replacement lamp module is built for the Hitachi CP-X2011N projector. It ships as a complete housing with the bulb already installed so the unit can be swapped in minutes. The part is aimed at schools, businesses and home-theatre owners who need a direct OEM-specification replacement without sourcing a bare bulb separately.
210 Watt AC Power Draw
The lamp operates at 210 watts AC and uses a UHP 140 watt bulb design coded 5050. Brightness will follow the projector’s original calibration because the electrical and optical specs match the factory unit. No firmware update or menu adjustment is required after installation.
Tool-Free Housing Swap
The assembly slides into the projector’s lamp compartment and locks with the existing retaining screws; no special tools are needed. A common mistake is forgetting to reset the lamp-hour counter in the projector menu, which leaves the replacement warning active. Another issue is touching the bulb glass with bare fingers, which can create hot spots and shorten life.
How it compares
Measured against everything we stock in DLP TV Lamps & Bulbs, at today’s prices. Recalculated every night.
- Price $61.99
- Cheaper than about 65% of the 8,306 comparable items (median $97.99).
Specifications
| Product | |
|---|---|
| Brand name | Jaspertronics |
| Model name | CP-X2011N-LAMP |
| Part number | CP-X2011N-LAMP |
| Product type | Project Lamp |
Questions about this item
Which lamp module fits the CP-X2011N projector?
The CP-X2011N-LAMP module is built specifically for the Hitachi CP-X2011N projector and ships as a complete lamp-and-housing unit.
What does the 210 W power rating mean when the lamp is running?
The lamp draws 210 W from the projector’s power supply, delivering the brightness and colour performance the CP-X2011N was designed for.
What lamp technology is used and what does the UHP210/140W5050 designation indicate?
It uses a UHP lamp rated at 210 W with a 140 W operating mode; the 5050 code identifies the exact burner specification for this model.
More in DLP TV Lamps & Bulbs
Similar items
Sony VPL-EX70 Genuine OEM Philips 220-150W 1.0 E19.4 dlp replacement lamp
- Projector Lamps





