TRENDnet TC-KP48S 48-Port Blank Keystone Shielded 2U 19" Patch Panel
- Patch Panel
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects two devices to a single Ethernet line with gigabit speed and an 80 cm USB power cable
This Gigabit RJ45 Ethernet Splitter turns a single network cable into two simultaneous connections for devices such as computers, TVs or set-top boxes. It is aimed at installers who cannot run additional cabling but need both endpoints online at the same time. A USB power cable is included and must be connected for the splitter to operate.
Installation is straightforward: link the incoming Ethernet cable to the single input jack, attach the two outgoing cables to the dual female ports, then plug the supplied 80 cm USB cable into any standard 5 V USB source. The unit will not function without that power connection, which is the most common reason a new setup appears dead on arrival.
Before ordering, verify that the existing cable run uses Cat5e, Cat6, Cat7 or Cat8 wiring so the 1000 Mbps rate can be sustained on each leg. Ensure a USB power outlet — charger, hub or powered port — is reachable within the 80 cm lead length, because the splitter cannot operate on data signals alone.
Measured against everything we stock in Patch Panels, PoE & LAN Adapters, at today’s prices. Recalculated every night.
| In the box | |
|---|---|
| In the box | 1 x Gigabit RJ45 Ethernet Splitter |
| More details | |
| Type of switch | Ethernet Splitter |
Connect the USB power cable to a 5 V supply, plug the incoming cable into the single RJ45 port and attach two devices to the dual female ports; both should show an active 1000 Mbps link simultaneously.
The package includes one Gigabit RJ45 Ethernet Splitter, one 80 cm / 2.6 ft USB charging cable and an instruction manual; you must supply a standard 5 V USB power source and the Cat5/5e/6/7/8 network cables.
This single model provides 1 input and 2 output ports with concurrent 1000 Mbps operation on both ports when powered via the included USB cable, so no other version or capacity is required.
More in Patch Panels, PoE & LAN Adapters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?