We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

HNZXIB

HNZXIB DFY-10/40 10 L -40 °C to 98 °C laboratory supply

SKU CH-F83N-WVV82 MPN DFY-10/40

A 10 L laboratory bath circulates fluid from -40 °C to 98 °C with ±0.1 °C accuracy and a 20 L/min pump

  • Total capacity10L
  • Rated speed20L/min
  • Temperature range-40 °C to 98 °C
  • Rated voltage110 V
  • Product typeWater/Oil Bath
  • Precise ±0.1 °C stability for reproducible results
  • Wide -40 °C to 98 °C range covers diverse protocols
  • 20 L/min circulation ensures uniform bath temperature
  • 10 L stainless tank handles standard sample volumes
  • Magnetic stirring in two zones improves thermal uniformity

Laboratory circulator for low-temperature research

The HNZXIB DFY-10/40 is a 10L water and oil bath that circulates fluid at 20L/min across a -40°C to 98°C range. It suits scientific, biological, medical and chemical departments needing precise low-temperature conditions without dry ice or liquid nitrogen. Magnetic stirring in two sections improves tank uniformity for viscosity measurements and reaction work.

Check voltage and aperture fit before ordering

The unit requires a 110V 60Hz supply and an opening diameter of 285mm for vessel placement. Verify that your bench power matches the voltage and that your glassware or fixtures clear the aperture. The wooden-case packaging adds transit protection but does not alter the electrical or mechanical interface you must provide.

Sustained operation at ±0.1°C stability

Under continuous load the refrigeration system delivers between 748W and 2548W of capacity to hold the set point. The circulating pump maintains 20L/min flow while the dual-section magnetic stirrer prevents thermal gradients during long runs. Temperature accuracy remains within ±0.1°C throughout extended cycling between the extremes of the range.

How it compares

Measured against everything we stock in Lab Equipment & Supplies, at today’s prices. Recalculated every night.

Price $2,931.99
Pricier than about 90% of the 734 comparable items (median $60.99).

Specifications

Product
Total capacity10L
Product typeWater/Oil Bath
Performance
Rated speed20L/min
Power
Rated voltage110 V
Environment & compliance
Temperature range-40 °C to 98 °C

Questions about this item

Does the unit come with the circulating pump and magnetic stirrer already installed, or do I need to buy them separately?

The circulator pump rated at 20 L/min and the two-section magnetic stirrer are built into the bath, so no extra pump or stirrer purchase is required.

Should I choose the 10 L model or a different capacity for a -40 °C to 98 °C range?

This DFY-10/40 model provides the full -40 °C to 98 °C range with a 10 L stainless-steel tank; other capacities would carry a different model number.

Will the bath hold ±0.1 °C accuracy when I connect it to an external reactor through the 285 mm opening?

The ±0.1 °C specification is measured at zero load; adding an external loop through the f285 mm aperture will introduce thermal load that typically widens the actual tolerance.

More in Lab Equipment & Supplies

Similar items